Wehre do I run the power in my Blazer?

[fatryan 5,000+ posts]

ok in a 98 blazer shouldnt be too different from my 98 s-10. if you look on the passenger side behind the carpet on the firewall you should see a gromet w/ a wire going thought it. that wire is the antenna for the stereo. thats where i have mine ran to. but make sure you seal it back up or else you will have water leaking in it when you run your a/c for a long period. there is also a place on the passenger side near the brake resivoir i think im not too for shure.

my brake resevior is on the driver's side

 

[fatryan 5,000+ posts]

enlage ur hole u already have drilled and run it that way

thats what i would normally do, but i think it will be too visible. i already have 2 awg running through, so another 4 awg will be kinda obvious...i think.

 

[stalephotograph 10+ year member]

sorry about saying the brake resivoir was on the passenger i actually ment to put driver side. just had passenger side on my mind, since thats the most common place in a chevy i know of.

 

[fatryan 5,000+ posts]

well the problem with that is that i already have RCAs running down the drivers side