Two 2 Ohm DVC Subs Wiring Help

[Sovereign12 10+ year member]

I have Hifonics BRZ1700.1D which is a mono amplifier but has 2 sets of speaker wire terminals. So would it work to wire the subs like in the diagram I made to produce a 2ohm load?

Thanks!

Click to read more...

 

[Sovereign12 10+ year member]

Bump!

 

[CRXBMPN 5,000+ posts]

it looks like you have your subs in series in your picture, so you would have two 4 ohm speakers, wiring the +'s and -'s to the amp would leave you a 2 ohm load. I think you got it.

 

[ultimate157 5,000+ posts]

Yes, what you have pictured will be a 2-ohm final impedance.

 

[Sovereign12 10+ year member]

The subs are dual 2 ohm voicecoils

 

[ultimate157 5,000+ posts]

The subs are dual 2 ohm voicecoils

He's saying if you wire each sub in series first, then each sub will be "4-ohm SVC" as wired... then wired them in parallel and the final impedance will be 2-ohms at the amp.

 

[CRXBMPN 5,000+ posts]

he needs to do it exactly as the diagram says, and how we have confirmed not once but twice... series each sub up to 4 ohm, then take your remaining +'s and -'s and put them into the corresponding mofo spot on the dat dang amp son!

 

[Sovereign12 10+ year member]

Thanks Guys!

I always doubt myself and just wanted to double check.