tuning, whats your tuned to?

[jeepintn 10+ year member]

whats your box tuned to? just trying to get a general idea of what i need to tune to, i HAD my design ready for 35 hz, but now that imhaving to redesign for various reasons... it would be much easier in my app to tune to around 37, would this be too high for daily? i listen to mostly rap/hip-hop

Click to read more...

 

[tank65 10+ year member]

mines tuned to 32hz and i listen to mainly rap/hip-hop

 

[danteBirosel 5,000+ posts]

i always love the way 32hz sound...

 

[JimJ 5,000+ posts]

For your purposes, it should be fine...

 

[ravendarat 10+ year member]

27.8 hz //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[dleccord 5,000+ posts]

43.102hz

 

[jeepintn 10+ year member]

ok, i just still wanna be able to hit the lows. my problem is, after redesign, my box is 6.375 after subs displacement, and my port area is 12.5 tall x 7.25 wide... how long would that have to be for 35hz? maybe my math is wrong, but i get 139.1 inches... and with the same numbers to tune to 37 hz, its only about 37.7 inches long, am i doing this wrong?? someone PLEASE PLEASE double check me and help me out

 

[xluben 10+ year member]

mine's tuned to 32Hz

winisd says you'd only need:

30.66" for 32Hz

24.55" for 35Hz

21.27" for 37Hz

is that right?

 

[jeepintn 10+ year member]

mine's tuned to 32Hz
winisd says you'd only need:

30.66" for 32Hz

24.55" for 35Hz

21.27" for 37Hz

is that right?

im not sure, i have winISD and never learned how to use it. im going off what bbp is telling me...

 

[PepsiFiend69 10+ year member]

all of mine have been tuned to 33 htz, i just always liked the way they sounded.

but i mixed it up this weekend and built a 30htz box for my new RLP, i ran outta daylight though, so i didn't get to listen to it yet //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[mazdakid 5,000+ posts]

i usually tune 32 or lower with my 18's. i just built a box for my type r 12 thats in there right now and its tuned around 33

 

[skadude016 5,000+ posts]

i was at 32hz. it was pretty rad. good bottom end. Then I went to 44-45 hz and gained alot more in volume. but missed some bottom end

 

[xluben 10+ year member]

yeah, i just did it out by hand and got 26" of actual port (for 32Hz)

winisd must automatically add in end correction (1/2 of port diameter added to the actual length)

someone please correct me if i'm wrong

 

[bjfish11 5,000+ posts]

30 Hz

 

[jeepintn 10+ year member]

yeah, i just did it out by hand and got 26" of actual port (for 32Hz)
winisd must automatically add in end correction (1/2 of port diameter added to the actual length)

someone please correct me if i'm wrong

ok, i just did it with bbp and winisd, and i thnk winisd is giving lengths given without taking out the port displacement... like i say, my box is 6.375 cubic feet after sub displacement, before port displacement...