too much MIDBASS?

[shaneb 10+ year member]

if you have depth to play with in the doors, try a thinner baffle rather than spacers that push the door out. i stopped making baffles out of 3/4 mdf a while ago because of this.

^ i agree try 1/2" wood.

Shoot I have 1 1/2'' inch baffles on my ID mids.

But they dont rack on the door panel.

 

[jdawg 5,000+ posts]

get the router out and a rabbet bit and flush mount the hole

 

[headless 10+ year member]

it's a common problem...but most people just deal with it without asking how because the solution is ****ing obvious. Either you make your baffles thinner, cut your door panel, trim the back of the door panel, or put a ring around the front of the speaker area to push the door away from the cone & surround.

I've got 1.25" baffles here...and i had to cut bigass holes in the door panels to fit the door panels back on at all. At least the power line cs fit //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif 3.8" mounting depth = difficult to fit in most places. I should really glass some replacement door panels...