This is my system

  • Thread starter Unregistered
  • Start date
  • Replies 13
  • Views 2K
U

Unregistered

Guest
I have six twelve inch Rockford punch "Z" series subs. To run my subs I am using a Soundstream Ref. 700 s/x. I have the amp wired in parallel. I still have power left over. For my mids/highs I am using two Pioneer Comp. sets 6.5". I am going to upgrade them with MB Quarts soon. As for my head unit I have a Pioneer 7200. I am upgrading that also with a Kenwood 910dvd. Also, for any one that has a sound stream amp I truley advise getting the BLT to boost your preamp voltage.

Give me a description of your systems if you like.

Later.

 
its a piece of **** but i got a Profile 800SX, 2 12" JBL GT's and a Kenwood 316 head unit. this summer im gonna get a visonik v2608 which puts out 1400 watts.

 
I have 2 Audiobahn Alum10x s hooked up to 2 JBL 1200.1 s. I also have Infinity 6x8s all around and a Sony ES h/u. It sounds pretty good.

 
kottonmouth, i might b interested in buying your amp if that helps for the visonik. I set-up systems afforadbly for some friends and am in the middle of a set-up. How many watts is it? How big is it?

 
my amp specs are:

800 watt x 1 max at 4 ohms

600 x 1 rms at 4 ohms

300 x 2 rms at 2 ohms

200 x 2 rms at 4 ohms

it has three way protection and is only 1 1/2 month old. bought it for 210. i will sell for 155. its a nice amp, my subs r cheap things though.

 
Previous System

Pioneer DEH P7200

4 Alpine 6.5 DDrive Coaxials (Kicks & Doors)

2 Infinity Perfect 12.1 (rear deck mount)

Rockford Fosgate Punch Power 50.2

Rockford Fosgate Punch Power 400.4

Rockford Fosgate Punch X

Unfortunately- this system, and the car it was in was claimed by a warehouse fire last july.

As for right now:

Car 1

Alpine 7871

Infinity6902i

Thats it -for now!

Car 2

Clarion DRX 8795

JL Audio 60.1 (6.5") Components

1 Pioneer TS-W304C 12"

1 Pioneer PRS-X320

1 Pioneer PRS-X720

1 Profile Q110 Active EQ

-This car's system was assembled from equipment that I had laying arround after the fire. I didnt know what to expect, so I threw it together- and to quite a few peoples surprise, it works incredibly well together! the Sq is impeccable!

I havent really been actively purchasing Car Audio Gear for myself for about 6 months, as most of my extra income after bills is going to the restoration of my Cougar. This should be complete early summer of this year-providing all goes well. I am currently negotiating the installation of a 225 Hp shot of NOS for the beastly 302. I am not totally sure if it will hold that much all at once, so I may wait on the NOS and invest in a new set of Keith Black Forged Pistons instead.

We'll have to see what happens from here!

take it easy,

-zane

 
my stuff listed below... not the best, but, i am currently unemployed and will have to wait for a job before i can upgrade.

 
Vehicle: 95 Camaro Z28 ( 550 horsepower..........not bad for a 350 w/o nitrous)

HU: Alpine IVA-C800

Front: 2 pair MB Quart 6.5 3 way components

Rear: 2 pair MB Quart 6.5 3 way components

Amps: 20 Memphis 1000D's and 4 Memphis belles (soon to be 12 Memphis Mojos and 4 3004's)

Subs: 6 MTX RFL 15's

Power accessories: 3 Batcap 8400's, 4 200 amp alternators, and about a mile of various sized wires LOL

It's nothin to claim braggin rights over.............but it works

 
vehicle: 98 mazda protege

HU: clarion dxz615 200

front: blaupunkt 6.5 70

rear: blaupunkt 6x9 70

hi/mid amp: jbl p80.4 160

sub amp: RF 800.2 350

subs 2: RF HE2's 250

custom box (made by me) 70

total: 1170

p.s. i have probably wasted 700 on expiramenting and replacing old stuff

 
Head Unit: Alpine 7878 MP3/CD with XM Radio Receiver and antennae

Eq: Kenwood KGC-9044 (old school and love the lights!)

Fr: Diamond Audio M561 components (6.5s)

Rr: Diamond Audio 265i (6.5s), Polk DX6 (6.5s) in storage area

Amp: Zapco Ref Series 360

Sub: Alumapro BP12 (4ohm)

Sub amp: Zapco Ref Series 350 with a 1Farad Digital Cap

its not much to look at, but the SQ is amazing.

http://air_plaza.tripod.com/plazas/id7.html

 
after i am done ordering everything it should look like this

HU: kenwood kdc9017

doors: kenwood 6 1/2 comp.'s

sides: kenwood 6907 6x9's

deck: kenwood 6907 6x9's

sub: audiobahn 1500x

amp for highs : kenwood 100x2 phonix gold 100x2

sub amp: harrison labs 800.2 audio engine

this will be my 1st system so i will see how it goes and learn from it i am making 6 differnt boxes to try the sub in, all made from 3/4" HDF .I will also get a red top and a cap to give me more power

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

The Kappa's have a high sensitivity rating of 93 db so the X802-5 would be fine. A good high sensitivity 8" sub in a properly sized box would fit...
2
97
Sweet!! Im happy to hear that it was not a major issue.!! Very nice man. Thanks for letting us know what the culprit was!!
19
592
Well, I've owned probably over 100 different drivers in the last 40 years and almost every single speaker in the NVX line-up over the last 8...
16
679
I'm most likely getting a 2022 Infinity QX60 next week. Like most new cars, it has the "Infotainment" system with the huge screen and all the...
0
304
that is an Ideal crossover and designed for use in an home type loudspeaker. A simple Linkwitz-riley 2-way is easy enough/ The tweeter wire lead...
36
1K

About this thread

Guest
Thread starter
Joined
Location
Start date
Participants
Who Replied
Replies
13
Views
1,684
Last reply date
Last reply from
jester73440
1714321195129.png

Doxquzme

    Apr 28, 2024
  • 0
  • 0
1714321134050.png

Doxquzme

    Apr 28, 2024
  • 0
  • 0

Latest topics

Top