Joe89 10+ year member
Senior VIP Member
- Thread Starter
- #16
Didn't get as much done this weekend as I had hoped... Couldn't work on Easter and removing the headliner took much longer than anticipated. I ended up removing the front carpet, some more trim, the headliner, and then scraping away at the stock deadening adhesive for an hour or so. Then, my friend's angle grinder could not fit into the space to cut away the 3 roof braces, so I had to use the Dremel.
Image Above: Roof ready for MDF treatment, I will attach 3/4" MDF with Loctite PL Premium
This is where I cut away the roof braces. They will all be mig welded back into place once the MDF is affixed to the roof.
Finished the weekend's work with the application of some Alphadamp to some rear sections of the vehicle, including the rear passenger side quarter panel. I will do a comparison video of the dampening ability of 100% coverage of Dynamat extreme to the ~40% coverage of the Alphadamp next weekend.
Image Above: Roof ready for MDF treatment, I will attach 3/4" MDF with Loctite PL Premium
This is where I cut away the roof braces. They will all be mig welded back into place once the MDF is affixed to the roof.
Finished the weekend's work with the application of some Alphadamp to some rear sections of the vehicle, including the rear passenger side quarter panel. I will do a comparison video of the dampening ability of 100% coverage of Dynamat extreme to the ~40% coverage of the Alphadamp next weekend.