The Saturn: Death-Horn Build/Addition (10kw+)

[CranberryYumYum 10+ year member]

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Pioneer~Saturn 5,000+ posts]

Thanks, everyone...its a freakin tank and a real pain to mount vertically lol...60 pounds.

vids? Have you decided on the 10s yet? edit nevermind I saw the FIs

DC lvl 4's //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif And no vids yet //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif...will definitely get on that when I can find my camera or someones around with one.

looks like an american bass 1100.1. it must be 20k at 18volts.

This has been said a lot //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif check out the guts //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

And I got all 12 runs of shok comp cable to the amp today //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif pics in a bit

 

[misfit138 5,000+ posts]

I wonder if that's EXACTLY like the DD Z-SE? //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Pioneer~Saturn 5,000+ posts]

I saw a guy holding the new DD and it didnt look as big...

 

[misfit138 5,000+ posts]

I saw a guy holding the new DD and it didnt look as big...

You're right. The Audioque is around 8 inches longer than the Z-SE.

 

[Pioneer~Saturn 5,000+ posts]

Alright, got all 12 runs to the amp today //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

What I had to start with...yuck.

Several hours later and sweating like a pig...

And what was left of the 50' spool of shok comp cable...

 

[rmzsuzuki89 10+ year member]

Looking good, amp is beastly.

How rigid is that fiberglass? I'm thinking about using it in my build to two sections of the inside of my wall, but don't want that to be a weak spot. I was thinking it should be fine after a chit ton of layers haha.

 

[Pioneer~Saturn 5,000+ posts]

Thanks. And I have it layered up pretty well, its solid. I'll have to watch it closely on some low notes to see if it flexes any though...not very much at all if it is

 

[rmzsuzuki89 10+ year member]

Thanks. And I have it layered up pretty well, its solid. I'll have to watch it closely on some low notes to see if it flexes any though...not very much at all if it is

O ok. I have been debating on just cutting up some of the mdf I have left or glassing it. It's where the front part of the box connects to the rear, and the way it's set up following the floor makes it a funky angle...I figured since I have access to the mat that is used to make the hulls of boats, maybe I'll put it to use. Or maybe just HD mat if they're out. I was thinking about layering it until it is about an inch to an inch and a half thick. The spots are only about 5"x37".

 

[IMOVeCHICKENS! 10+ year member]

this is an insane build only thing crazier i ever saw was this ford escort with a single RE xxx 18 in a huge trunk sealed firing into the car enclose on a kicker warhorse thing flexed so ****in much

 

[DB-Audio 10+ year member]

god amp that amp is huge cant wait to see this complete

 

[12voltz+- 10+ year member]

DEFF more beefyer then the dd z-se the dd z-se looks similar but the aq20k have another set of 1/0 power and ground inputs as well as another set or rcas and about 8 inches on the dd i guess you could say its a dd z-se on steroids ! lol

 

[CranberryYumYum 10+ year member]

thought about the new icons? same dustcap as the xcons. if you're running less than 15kw they would probably be happy with that power

 

[Pioneer~Saturn 5,000+ posts]

Potentially but Im pretty set with DC unless they can lay down one heck of a deal on them for me...

 

[bunkerking09 10+ year member]

pioneer - check your pm's.

slut