The..."What I'm doing with my $5 ED 8's"...thread

so has anyone tested these yet and like them?
Tried one out in my van off 100 RMS in a 1 cube sealed box a while ago. Not much, but i imagine 4 of them wouldnt be too bad. Im about to go make a ported box for two of them and try that.

The SQ wasnt bad, and it shook the mirror. IMO not bad for 5 dollars.

There is one problem with one of the drivers. It was the first one i took out, so therefore it was my test woofer. I test it out free air, only bottoming it out a couple times. Unhook it and bring it down to the garage for fitting. It then sits down there for a night and when i finish a box and try it out i have lots of rubbing. Its not bottoming out its just got alignment issues im assuming. Anyway i will let you guys no how the ported box sounds when its finished.

 
There is one problem with one of the drivers. It was the first one i took out, so therefore it was my test woofer. I test it out free air, only bottoming it out a couple times. Unhook it and bring it down to the garage for fitting. It then sits down there for a night and when i finish a box and try it out i have lots of rubbing. Its not bottoming out its just got alignment issues im assuming. Anyway i will let you guys no how the ported box sounds when its finished.
Maybe bottoming out the coil loosened one of the loops ?

 
Maybe bottoming out the coil loosened one of the loops ?
Must be something among those lines, i cant seem to find the thing for the life of me. 2 year olds FTL. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

The ported box is done. 2 cubes at 35 htz for two drivers. Tried it out real quick in the garage and it is a little loud and it sounds nice but the box has a couple leaks and needsto dry completely before i rule anything major.

 
Why would you run subs in HT in a sealed enclosure? I'd figure a ported box tuned LOW would be the best. After all, wouldn't you be crossing over the subs very low in a HT application? Your regular woofers should be more than enough for the midbass? I can't see a sealed box being able to have the output for the explosions and whatnot in movies. I thought the whole sealed subwoofer thing was for cars only.

Of course I'm probably wrong :p.

 
Must be something among those lines, i cant seem to find the thing for the life of me. 2 year olds FTL. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif
The ported box is done. 2 cubes at 35 htz for two drivers. Tried it out real quick in the garage and it is a little loud and it sounds nice but the box has a couple leaks and needsto dry completely before i rule anything major.
Care to share the box design? If it's not terribly complicated I might port them right off the bat if they can squeeze into 2 cubes //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif

Let us know how it sounds when it's dry and you get a good test on them.

 
Care to share the box design? If it's not terribly complicated I might port them right off the bat if they can squeeze into 2 cubes //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gifLet us know how it sounds when it's dry and you get a good test on them.
X2

 
The box was real simple. 2 cubes with 2 2" PVC ports 5.5" long. Ill seal it up when i get home and test it out then.
Do you get any port noise with the two 2" ports? I had a setup using two of the ED 6.5 subs in one cube with dual 2" ports and I got some port noise. I would imagine two 8's would have even more.//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 
Three pages and still no pics....This changes NOW!

ED8s001.jpg


ED8s002.jpg


ED8s003.jpg


ED8s004.jpg


ED8s005.jpg


 
I was thinking of goining vented with my 4 subs as I have no idea how to do aero ports of any kind.

but i dont have a ton of room in my car because I would like some space left over. It will be 3 cubes tuned to 33hz

 
well i got my 20 eds in today....a case of 2's and a case of 4's ...In a seperate box ed shipped two 2ohms and two 4 ohms...I'll play with those 4...the other 16 will get locked away in storage....for a while anyway...lol
I bought 12, but wanted more.. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

ItalynStylion

10+ year member
Audiophile
Thread starter
ItalynStylion
Joined
Location
Fort Worth, Tx.
Start date
Participants
Who Replied
Replies
134
Views
6,797
Last reply date
Last reply from
528hz
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top