tc9

[SPLaudio 5,000+ posts]

most power anybody has ran to 1 daily and for burps? just curious...

Click to read more...

 

[illbmeubu 10+ year member]

greatestpenn i think had a tc9 hybrid and he was feeding two lanzar HTG2600D's strapped. nice stuff too, no stress.

 

[James Bang 5,000+ posts]

tc9 is just the motor... that alone won't tell you what type or size of box to put it in.

 

[LGK 10+ year member]

... i don't see anyone asking anything about an enclosure... just how much have people put to tc9's for burps

 

[SPLaudio 5,000+ posts]

right just curious on the power people have throw at the motor. building a hybrid just wanted to know how power hungry to make it...

 

[jmanpc 5,000+ posts]

could be 500w, could be 2000w.

depends on the soft parts you put in it //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[James Bang 5,000+ posts]

... i don't see anyone asking anything about an enclosure... just how much have people put to tc9's for burps

whoopdidoo, I got confused w/ that "tc9 box" thread...

anyhow, the motor does not determine the power handling.

 

[DonH 5,000+ posts]

whoopdidoo, I got confused w/ that "tc9 box" thread...
anyhow, the motor does not determine the power handling.

correct! im going with a bl re-cone gona give it around 1200 daily

 

[thegreatestpenn 5,000+ posts]

soft parts play a major roll, and size does too because different size subs have different cooling ability.

with that said my tc-9 received 2400wrms and got loud and didn't burn up the coil. I wouldn't recommend it for long tho

 

[grimreper912003 5,000+ posts]

How are you putting power to the motor? Alot of it is the thermal limits of the motor. The heat generated by the coil is dependent of softparts.

 

[negative3five 10+ year member]

If you want sealed specs for a 12 I run 17.5x17.5x11.5 lxwxh mount it sub up works perfect for 1200 watts o yea their all external dimensions wit .75 mdf.

 

[Noobtastic14 10+ year member]

could be 500w, could be 2000w.
depends on the soft parts you put in it //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

Who cares about motor saturation or power compression right?

i gave mine 800w clipped when i had them. (before Oscope)

-Drew

 

[ciaonzo 5,000+ posts]

A magnet assembly alone is not a motor as was stated by James Bang. You need a coil and a magnet to have a motor. To oversimplify it, the coil determines the thermal power handling and the soft parts determine the mechanical power handling. Other than wicking away heat, due to the mass of metal being near the coil and having provisions to force air over the coil, the magnet assembly has very little to do with the question your asking. It's more to do with the total mass of aluminum or copper involved.

 

[SPLaudio 5,000+ posts]

most of you dont know about motor Bl and saturation. example i can put in a dd coil that would handle 3k daily and 5k for burps easy and it burn it up in the tc9 with half that power, why because of the motor not the coil.

what makes the dd 3500 not handle as much power as the 9500? they both have the same coil, its the motor.

 

[SPLaudio 5,000+ posts]

so what ur saying is if i have a tc9 motor and put a heavy flat ccaw coil in with 10 spiders it will b louder than a stock mt because the coil is bigger and spiders are stiffer,not...