tc9 (help)!!!

[C_FOSTER 10+ year member]

ok peps, i need to know if theres a difference in a .75in slug tc9 motor than an 1in slug tc9 motor bc the gap looks a little different...may just be the pic im not sure... but anyways need this info quick!!!

Click to read more...

 

[ciaonzo 5,000+ posts]

In my experience, the gap width for the .75" version is 5mm wide, while the 1" version is 6mm wide. The height is the same, approximately 12-13mm.

 

[C_FOSTER 10+ year member]

In my experience, the gap width for the .75" version is 5mm wide, while the 1" version is 6mm wide. The height is the same, approximately 12-13mm.

awsome thanks man, one more question wich one is going to be better for fi q recone??

 

[C_FOSTER 10+ year member]

please answer

 

[ciaonzo 5,000+ posts]

awsome thanks man, one more question wich one is going to be better for fi q recone??

I wish I were familiar with those, but I'm not. You might want to talk with the folks at fi or one of the more experienced builders on this site. There are some good ones on here, for sure.

 

[ciaonzo 5,000+ posts]

please answer

lol

 

[C_FOSTER 10+ year member]

I wish I were familiar with those, but I'm not. You might want to talk with the folks at fi or one of the more experienced builders on this site. There are some good ones on here, for sure.

the folks at fi will say we wont help u if it aint our sub. or some **** like that so F that. but hwo do u think i should talk too?

 

[DonH 5,000+ posts]

i can measure my tc9 .75" slug motor for you if someone wants to measure there 1" slug motor if they have one laying around lol

 

[C_FOSTER 10+ year member]

i can measure my tc9 .75" slug motor for you if someone wants to measure there 1" slug motor if they have one laying around lol

while ur doing that u wanna sell it to me also?? lol

 

[grimreper912003 5,000+ posts]

I have a Fi Q recone on a .75" slug TC9 and it was great.

 

[C_FOSTER 10+ year member]

I have a Fi Q recone on a .75" slug TC9 and it was great.

awsome dude thanks man. and it worked perfect?? was it dual 2 ohm or dual 1?

 

[C_FOSTER 10+ year member]

awsome dude thanks man. and it worked perfect?? was it dual 2 ohm or dual 1?

^^^^

 

[grimreper912003 5,000+ posts]

D2. It was fine untill 1700w rms did her in.

 

[C_FOSTER 10+ year member]

D2. It was fine untill 1700w rms did her in.

hahahs sweet!!! did it have bp power? ima run mine with no bp power and 1200 rms. thinkin it should be fine. but thanks for the info. still got the tc9 motor?

 

[grimreper912003 5,000+ posts]

Gone. BP is in the motor iirc.