taking the back seat out for subs....

[jdawg 5,000+ posts]

lol how much condom space you need? Doing anything with the car other than audio? If it was mine, nice paint job and some wire wheels with a couple inch drop.

 

[bonesninja 5,000+ posts]

i did not cut any thing out

i'm assuming that picture represents using the trunk for the box space and the sub facing into the cabin

well if you look in the pic there is a big *** steel support running right down the middle of my trunk opening. Not to mention the openings themselves are only 13" and i will have 15"s. The baskets will BARELY if at all fit through one of the openings

 

[keifersracing 10+ year member]

ya and i did not see the pic you put up in tell 5 sec ago. so that is my bad here is a pic of what it will be

 

[bonesninja 5,000+ posts]

lol how much condom space you need? Doing anything with the car other than audio? If it was mine, nice paint job and some wire wheels with a couple inch drop.

nice paint job, bagged on 20" Foose nitrous rims

http://www.mhtwheels.com/wheel.cfm?brand=4&cat=112

 

[bonesninja 5,000+ posts]

ya and i did not see the pic you put up in tell 5 sec ago. so that is my bad here is a pic of what it will be

no biggie...this is just a daily beater too. No comps for me

 

[jdawg 5,000+ posts]

nice paint job, bagged on 20" Foose nitrous rims
http://www.mhtwheels.com/wheel.cfm?brand=4&cat=112

thatll work too lol

Honestly you should have a problem if you cut out that center support. Its a frame car, the body just sits on there, if it was mine I would wack it out. Then if you are worried about it later if you sell it or give it to your son just swinf by a body shop and have them weld some box thubing there, it will be stronger than factory.

 

[keifersracing 10+ year member]

subs up port up and make i realy nice amp rack in the trunk

 

[bonesninja 5,000+ posts]

thatll work too lol
Honestly you should have a problem if you cut out that center support. Its a frame car, the body just sits on there, if it was mine I would wack it out. Then if you are worried about it later if you sell it or give it to your son just swinf by a body shop and have them weld some box thubing there, it will be stronger than factory.

well if you look at the pic with the amps showing...that space up there is only 13.5 tall from floor to deck so i would have to run 12"s in there and i want 15"s for sure.

 

[jdawg 5,000+ posts]

yea you are right, just sayin on the support. Do you plan on laying with the 20's on there? If so you are gonna have to modify some stuff, there is not alot of room in the fenderwells front or back. I have had 3 of those cars, to lay the back you have to notch the frame, you can take the springs completely out of the back and it wont lay

 

[bonesninja 5,000+ posts]

yea you are right, just sayin on the support. Do you plan on laying with the 20's on there? If so you are gonna have to modify some stuff, there is not alot of room in the fenderwells front or back. I have had 3 of those cars, to lay the back you have to notch the frame, you can take the springs completely out of the back and it wont lay

not gonna lay it.

 

[jdawg 5,000+ posts]

cool just lettin ya know, if you pop an airline the innerfender will sit on the tire