System cost and thoughts

Cages2Clouds

Junior Member
19
0
O'Fallon
Hello guys, what are your thoughts on this system and is it a fair price? Finally what do you think instalation will cost?

A SAE-1500 watt amp $409.99

2 SA 12's $419.99

Amp kit wire free

Pioneer AVH5800BHS $314

SA-6.5 CX - Sundown Audio 6.5" 50W RMS Coaxial Speakers

SAE-50.4 - Sundown Audio Monoblock 300W RMS Class AB Full Range Amplifier

SD-6.5 CS - Sundown Audio 6.5" 60W RMS Component Speakers System $519.99

Total $1663.97

 
Hello guys, what are your thoughts on this system and is it a fair price? Finally what do you think instalation will cost?

A cab 1600.1 watt amp $200

2 SA 12's $419.99

Amp kit wire free

Pioneer AVH5800BHS $314

Polk db comp sets. $200 for 2 sets

something like ppi 900.4 4ch $150
This is what I'd do if it was my money.

 
decent price, you would save money doing the installation yourself. installing is fun!
Honestly I would love and have a blast doing so but I have no idea how to not do I know anyone who does and would just be so worried about screwing up the system or my car. I'm not completely ruling it out but chances are I'll go with a professional install.

 
No sundown helps cab. That cab 1600.1 is decent and $200cheaper then the sundown 1500..
Awesome, I found the polks on Amazon for a lil over $50 a set so if those aren't lacking in performance other id save a lot even with having to buy wiring. (The free working was due to the bulk buy at one place)

 
I'd go with this over an sae
* NEW * CAB-1600.1 Amplifier - Car Audio Bargain

This for a korean built 4 channel class A/B.

FSD Audio FZ 125.4 125-Watt 4-Channel Amplifier - SounDrive Audio Store

Polks are better. Sundown isnt a company thats known for great component speakers. Their Neo-pro mids are decent but everything else is bleh.

Subs are okay. Most of the cheaper recommendations already are reaching sundown prices nowadays.
Would you recommend the FSD Audio FZ 125.4 125-Watt 4-Channel Amplifier over the PPI 900.4 4 channel?

 
I like the comp sets. Each one you get

two 6.5"

Two tweeters

Two crossovers

So however you many you need

 

---------- Post added at 01:34 PM ---------- Previous post was at 01:33 PM ----------

 

Would you recommend the FSD Audio FZ 125.4 125-Watt 4-Channel Amplifier over the PPI 900.4 4 channel?


That fsd 4ch is good shlt. Either will do nicely

 
I like the comp sets. Each one you get two 6.5"

Two tweeters

Two crossovers

So however you many you need

 

---------- Post added at 01:34 PM ---------- Previous post was at 01:33 PM ----------

 

That fsd 4ch is good shlt. Either will do nicely
How many crossovers do I need? I have zero equipment purchased as of now and as you probably guessed lil know how in car audio systems lol

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

160AH lithium that supports a 12K system is pretty lofty! I've seen dual 24's or quad 12's that will do this. Most of what 've run across is dual...
3
186
The Kappa's have a high sensitivity rating of 93 db so the X802-5 would be fine. A good high sensitivity 8" sub in a properly sized box would fit...
2
606
Sweet!! Im happy to hear that it was not a major issue.!! Very nice man. Thanks for letting us know what the culprit was!!
19
1K
Well, I've owned probably over 100 different drivers in the last 40 years and almost every single speaker in the NVX line-up over the last 8...
16
1K

About this thread

Cages2Clouds

Junior Member
Thread starter
Cages2Clouds
Joined
Location
O'Fallon
Start date
Participants
Who Replied
Replies
17
Views
1,592
Last reply date
Last reply from
the727kid
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0

New threads

Top