http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=1357537453
Features:
Retail Price $299 Each!
120 oz. Double Stacked Strontium Magnets
Power Handling: 600 watts R.M.S.
Frequency Response: 23Hz - 500Hz
Efficiency: 91.1 dB
PHAT 2 Inch Foam Surround
Non- Pressed, Non-Transfer Paper Cone
KM3 Coated for Virtually No Cone Distortion
2.5 Inch 4-Layer ASV Voice Coil
Dual 4 Ohm
2 Ohm or 8 Ohm Operation
Depth: 5 Inch
Hole: 9 1/4 Inch
Diameter: 10 7/8 Inch
126.00 total for 2 of them with shipping.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=1359199183
BP-1200.1
* 1200 watts RMS x 1 at 2 ohms
* 14-13/16"L x 10-13/16"W x 2-11/16"H.
BP1200.1
Die-cast chassis uses the entire footprint for amplifier cooling
Direct-Connect" allows choice of 4 - 8-gauge power and ground cable
High-frequency switching power supply is more efficient, drawing far less current from the vehicle's electrical system
Four high-level and low-level inputs facilitate constant bass, regardless of head unit fader position
Variable electronic crossover and bass-boost optimize subwoofer performance
Specifications
Suggested Retail Price:
$749.95
Output 4 Ohms:
600W x 1
Output 2 Ohms:
1200W x 1
Signal to Noise (dBA):
>100
Frequency Response (± 3dB):
20Hz - 500Hz
Total Harmonic Distortion:
0.1%
Input Sensitivity:
250mV - 4V
279.95 with shipping
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=1357915710
Specifications:
* Built with 3/4" MDF material
* TWO - 10" holes for speakers
* Dimensions: 12" height x 12.5" bottom depth x 9.25" top depth x 30.5 width
* Divided chambers for better sound
* Two connection terminals
* .77 Cubic Feet per chamber
50.00 with shipping
With this set up you looking around:
455.95 And you will be pushing over 600 watts rms so amp will be great, and the subs can take 600 rms , and even more. they are not joke. But I was just showing what i thought. You can still go audiobahn their are cheaper than that. You can always go with the natural sound, and lower jbl amps...
Seeya
all brand new.
