Sub mounting tips and tricks suggestions...por favor?

[bhsdriller 10+ year member]

doesnt matter what screws you use.... a sawzall blade will zip right through them. if they are smart enough to use a sawzall

with the sub mounted, how do you get the sawzall blade to the screws?

 

[RangerDangerV2 5,000+ posts]

with the sub mounted, how do you get the sawzall blade to the screws?

gonna have to cut a little of the basket but it works.

 

[Dirtrider4eva 10+ year member]

No tint gives them plain view , so tint obviously hides it better if it's like 15% to 5%..

Just do a band pass box and ur fine if it's bolted to the car

 

[dirtyunclerandy 10+ year member]

with the sub mounted, how do you get the sawzall blade to the screws?

Just cut a square in the baffle. Take the wood off later.

 

[RangerDangerV2 5,000+ posts]

honestly the best investment would be an xd or glock 17

 

[goingdef 10+ year member]

a while back a friend of mine used tamper proof screws, long story short they ripped the cones up out of frustration and took a crow bar to the amp and just ripped it out. pretty much if someone wants it bad enough there either going to take it or break it.

 

[04silverz 10+ year member]

^^^ Always been my fear. Figure if they can't get it they'll f it up. Have to at least try

I've heard of people using solder over the screw heads or silicone sealant. Wouldn't recommend if you pull your subs out a lot.

Tint, car alarm, not blasting music in parking lots of stores/neighborhood and like said use variety of odd screws.

 

[CAT MAN 5,000+ posts]

On a side note: do you guys think window tint attracts thieves or what? I know it prevents them from seeing inside easily, but doesnt it also make them think you have something to hide?

not really considering most thieves dont want what they cant see

doesnt matter what screws you use.... a sawzall blade will zip right through them. if they are smart enough to use a sawzall

bro i think you are a thief

gonna have to cut a little of the basket but it works.

never go full retard

^^^ Always been my fear. Figure if they can't get it they'll f it up. Have to at least try I've heard of people using solder over the screw heads or silicone sealant. Wouldn't recommend if you pull your subs out a lot.

Tint, car alarm, not blasting music in parking lots of stores/neighborhood and like said use variety of odd screws.

i would use silicone or drill the screw out

 

[RangerDangerV2 5,000+ posts]

not really considering most thieves dont want what they cant see

bro i think you are a thief

never go full retard

i would use silicone or drill the screw out

no i am no thief... but I do know a few and I try to socialize with them as little as possible... and I told them that if they ever even think about jackin my shiz, I am going to **** them with a chainsaw.