sound dampining

[ross]

i would like to know if i can use peel and seal in place of dynamat if i just use about 3 r 4 layers . dynamat is impossible to find over here much less any other similar materials like fatmat and the like so please tell if this can work.thanks 4 any reply

Click to read more...

 

[BiaBia 10+ year member]

You can, but I think the heat tolerance for peal and seal is low, and since you're in the bahamas, I bet you car can get over the max temp for it. I heard its something like 135 degrees and it will start melting. Have someone else put input before you do anything.

 

[monte_carlo97 10+ year member]

i got 100 sq. ft of peel and seal installed and i have no problems in the summer. It does get a little soft though. I got another 100 sq ft. to install also.

 

[Expy2000]

I used about 3 layers on my doors and right now I am waiting on edead v3.0 to point over those layers for a solid fit. Couple other forum members have done it with great results.

 

[monte_carlo97 10+ year member]

Review Done On P & S

 

[ross]

thanks for the input guys i think am goin to try it cause it only gets to about 90 deg over here at the worst.

 

[monte_carlo97 10+ year member]

let us know how it goes. And remember that it gets hotter inside the car than it does outside. So make sure you take that into account

 

[wj94 10+ year member]

If it's 90 degrees outside, the inside of your car could easily be 110 or more, especially if it's a black car or going inside the doors.

 

[VoTran24 10+ year member]

If you live in an area where it doesnt get hot very often then it might be very hard to find peel and seal...if you cant find peel and seal just order edead from ED. It cost just a little more but not nearly expensive as dynamat. Edead should also be able to handle higher temps also.

 

[BiaBia 10+ year member]

Yeah, if its somewhere in 90 degrees outside, you car can easily surpass the 150 degree mark. In something like 100 degree heat, cars can get up to 210 degrees I heard.

 

[supa_c 5,000+ posts]

My amp was at 136F in the sun.

Not powered up, just turned on.