Someone with a TC-1000 Please help!

[bushtree 10+ year member]

Could someone with a TC-1000 please do me a favor and provide me with some measurements.. I want to start building my box, but the sub wont be here for week and the measurements on TC's website arnt complete.

I Basically just need to know to overall diameter of a 10" TC-1000 (so i can make a flush mount baffle). Their website says the cutout diameter is 9.5" so im just going to trust them on that, inless you know different.

Thanks,

Click to read more...

 

[DejaWiz 5,000+ posts]

Here ya go:

http://tcsounds.com/tc1000.htm#dim

 

[bushtree 10+ year member]

Here ya go:
http://tcsounds.com/tc1000.htm#dim

Yea, i know ive seen those dimensions. But im not sure what the overall dimensions are.

They list "Basket Diameter" as 10.65" Is that the overall diameter, so i could flush mount it?

It doesnt make since to me since its called the basket diameter, but mabey i just dont understand it right.

 

[Blove1991 10+ year member]

Get box done except for the baffle and once it gets there get the exact cutout...then put rest together and give a day for glue to dry then wang away with your flush mount

 

[bushtree 10+ year member]

Get box done except for the baffle and once it gets there get the exact cutout...then put rest together and give a day for glue to dry then wang away with your flush mount

I know, i would but im building a fiberglass box, so i cant really do much work without the rings....

If i was building an all MDF box it wouldnt be a big deal

 

[lilmaniac2 5,000+ posts]

i got a tc1000 10" here let me find a tape measure

 

[lilmaniac2 5,000+ posts]

i got a diameter of the basket with the gasket on 10 7/8"

 

[bushtree 10+ year member]

i got a diameter of the basket with the gasket on 10 7/8"

Thanks alot... So this is what i would need to do a flush mount correct? like edge to edge of the gasket = 10 7/8" ?

 

[lilmaniac2 5,000+ posts]

yup, its slightly inside 10 7/8" but i would do the 10 7/8" to give that 1/32" as slack for it to fit in snug, but easily slide in

 

[bushtree 10+ year member]

yup, its slightly inside 10 7/8" but i would do the 10 7/8" to give that 1/32" as slack for it to fit in snug, but easily slide in

Cool. Thanks alot, your a life saver.