Single capable amp needed to push 2 12" bone crushers.

[Wellyboy]

What is the appropriate dowel thickness?

Sent from my MHA-L09 using Tapatalk

 

[Boomin_tahoe 5,000+ posts]

Not anymore... the subs can be mounted after you get the box in the car... subs up/port back remember?..

Had to do the same. Imagine a 75 lb. box then add 100 pounds worth of subs. ..that's a lot of weight.

 

---------- Post added at 02:03 AM ---------- Previous post was at 02:03 AM ----------

 

What is the appropriate dowel thickness?
Sent from my MHA-L09 using Tapatalk

Maybe 1-1.25"

 

[shredder1 10+ year member]

Hmmmm[emoji23]
Sent from my MHA-L09 using Tapatalk

How many kilos do each of your Bonecrushers weigh?.. the box without the subs will be considerably lighter... and if you use Birch it'll actually be LIGHT... it's only single 3/4" thick material throughout...

 

[Wellyboy]

How many kilos do each of your Bonecrushers weigh?.. the box without the subs will be considerably lighter... and if you use Birch it'll actually be LIGHT... it's only single 3/4" thick material throughout...

22kg

Sent from my MHA-L09 using Tapatalk

 

---------- Post added at 06:11 AM ---------- Previous post was at 06:10 AM ----------

 

Had to do the same. Imagine a 75 lb. box then add 100 pounds worth of subs. ..that's a lot of weight. 

---------- Post added at 02:03 AM ---------- Previous post was at 02:03 AM ----------

 

Maybe 1-1.25"

I thought it would be thicker than that.
Sent from my MHA-L09 using Tapatalk

 

[shredder1 10+ year member]

22kg

Sent from my MHA-L09 using Tapatalk

 

---------- Post added at 06:11 AM ---------- Previous post was at 06:10 AM ----------

 

I thought it would be thicker than that.

Sent from my MHA-L09 using Tapatalk

All dowels I've used have been 1.5" diameter... IDK what your supplier has available... any size over 1" is sufficient just secure the dowel well...

 

[Wellyboy]

All dowels I've used have been 1.5" diameter... IDK what your supplier has available... any size over 1" is sufficient just secure the dowel well...

1.2m long 25mm thick. Tasmanian oak.
Sent from my MHA-L09 using Tapatalk

 

[shredder1 10+ year member]

22kg

Sent from my MHA-L09 using Tapatalk

 

---------- Post added at 06:11 AM ---------- Previous post was at 06:10 AM ----------

 

I thought it would be thicker than that.

Sent from my MHA-L09 using Tapatalk

22 KG?... your subs outweigh mine...

 

[Wellyboy]

22 KG?... your subs outweigh mine...

The frame of the subs is thicker than the frame of yours. Magnet seems to be same size.
Sent from my MHA-L09 using Tapatalk

 

[shredder1 10+ year member]

1.2m long 25mm thick. Tasmanian oak.
Sent from my MHA-L09 using Tapatalk

It'll be sufficient... I'd pre-drill the holes on the end where the screws are going to attach tho... as you don't want to split the material... then screw and glue them well in place...

 

[Wellyboy]

It'll be sufficient... I'd pre-drill the holes on the end where the screws are going to attach tho... as you don't want to split the material... then screw and glue them well in place...

I always pre drill
Sent from my MHA-L09 using Tapatalk

 

[Boomin_tahoe 5,000+ posts]

Some people use long threaded rod as well, with bolts/washers. Just so you know...

 

[Wellyboy]

Some people use long threaded rod as well, with bolts/washers. Just so you know...

I'v got 2 3m lengths of that eh......
Sent from my MHA-L09 using Tapatalk

 

[Boomin_tahoe 5,000+ posts]

I'v got 2 3m lengths of that eh......
Sent from my MHA-L09 using Tapatalk

you do?!

 

[Wellyboy]

you do?!

What ideas are you tryna put in my head mate? Lol.
Sent from my MHA-L09 using Tapatalk

 

[Boomin_tahoe 5,000+ posts]

What ideas are you tryna put in my head mate? Lol.
Sent from my MHA-L09 using Tapatalk

Absolutely nothing. Are you drinking?