Sealed Doors Question

[the727kid 10+ year member]

Alright I began deadning my doors today. I got all the deadner and the ensolite done on one door. But my doors have quite a bit of holes, including where the speaker is at. Anyways my question is, what do you guys use to seal up the holes? I saw in the sticky he used plexi, well I don't really have the tools to cut plexi or want to spend money on plexi.

BTW of it in the process

Click to read more...

 

[Eugenics 5,000+ posts]

bahahahahhahahaaaaahhhahahahaa i thought you were a filthy rich 17 yearold that made more than his own mother.... you can't afford plexi? that door looks like ****, by the way.

 

[the727kid 10+ year member]

You always seem to help all the time, preciate it. //content.invisioncic.com/y282845/emoticons/thumbsup.gif.3287b36ca96645a13a43aff531f37f02.gif

 

[gl0ck 10+ year member]

Lol, Great stuff the hell out of it????

 

[the727kid 10+ year member]

What?

 

[Eugenics 5,000+ posts]

seriously, how expensive are hacksaws now days?

 

[tracyrick 10+ year member]

Buy very thin alum. sheet metal from home depot, it comes in sheets, only about $10 or so. Use tin snips to cut out shapes that are a little larger than your holes. I used deadener matt to secure mine down, plus some heavy duty glue stuff from a caulk gun, mostly just the matt though, my glue wasn't too great I think. Then put matt over your metal.

 

[lostdaytomorrow 10+ year member]

5% tint eh?

 

[shellshocked 10+ year member]

I used plywood but plexiglas would be better (will not matter if it gets wet). It will take some time to do it right no matter how you go. Take your time. Also both my driver side and passenger side doors had the same cut-out so I cut parts to fit both doors at the same time.

 

[ScottGS400 10+ year member]

In my past cars I've just sealed off the holes with large pieces of sound deadening, is there an advantage to using plexiglass under the deadening for cutouts/holes?

 

[blowthemup 10+ year member]

I would also like to know this cause I plan on doing it on my next car.

 

[jakesford 10+ year member]

sheet metal plus some sheet metal screws...

 

[blowthemup 10+ year member]

ok cool