screws stripped on sealed enclosure.

[dub6pimp 10+ year member]

so 4 of the 8 mounting screws dont tighten onto my box. they just keep spinning. is this ok or should i fix this some how? and how could i fix this easily? maybe rotate it a little and making new holes would work?

Click to read more...

 

[bball09124 10+ year member]

that would work, or check out tee nuts.

 

[darkhunter139 10+ year member]

If you dont need to get the sub out I would not worry about it

 

[adas Pro Seller]

use some slightly larger screws and use a torque setting if you have a power drill

 

[ballstothewall 10+ year member]

Rotate the sub...

 

[dustin420 10+ year member]

use t nuts, like these http://www.allproducts.com/metal/eyelet/15-prong_t_nut.html

 

[mlstrass 5,000+ posts]

larger screws or toothpicks and glue to shim up the existing holes, so the screws will grab...

 

[mikey7182 10+ year member]

Larger screws, rotate the sub, predrill your holes with a small bit, etc.

 

[dub6pimp 10+ year member]

cool. thank you guys for helping me in my noobish questions, with real answers.

 

[ballstothewall 10+ year member]

Threaded inserts > *