D dub6pimp 10+ year member Junior Member 14 0 seattle Feb 4, 2008 #1 so 4 of the 8 mounting screws dont tighten onto my box. they just keep spinning. is this ok or should i fix this some how? and how could i fix this easily? maybe rotate it a little and making new holes would work? Click to read more...
so 4 of the 8 mounting screws dont tighten onto my box. they just keep spinning. is this ok or should i fix this some how? and how could i fix this easily? maybe rotate it a little and making new holes would work? Click to read more...
B bball09124 10+ year member CarAudio.com Veteran 2,487 0 psl, fl Feb 4, 2008 #2 that would work, or check out tee nuts.
darkhunter139 10+ year member CarAudio.com Veteran 3,682 0 PA Feb 4, 2008 #3 If you dont need to get the sub out I would not worry about it
adas Pro Seller MurderMat 1,718 0 SRQ-FL Feb 4, 2008 #4 use some slightly larger screws and use a torque setting if you have a power drill
B ballstothewall 10+ year member CarAudio.com Veteran 3,143 0 Kansas (KSU) Feb 4, 2008 #5 Rotate the sub...
D dustin420 10+ year member Neo the Hero 305 0 Hicksville ohio Feb 4, 2008 #6 use t nuts, like these http://www.allproducts.com/metal/eyelet/15-prong_t_nut.html
M mlstrass 5,000+ posts Shaggy DOA 10,908 0 Illinois Feb 4, 2008 #7 larger screws or toothpicks and glue to shim up the existing holes, so the screws will grab...
M mikey7182 10+ year member CarAudio.com Elite 919 0 Gilbert, AZ Feb 5, 2008 #8 Larger screws, rotate the sub, predrill your holes with a small bit, etc.
OP D dub6pimp 10+ year member Junior Member 14 0 seattle Feb 5, 2008 Thread Starter #9 cool. thank you guys for helping me in my noobish questions, with real answers.
B ballstothewall 10+ year member CarAudio.com Veteran 3,143 0 Kansas (KSU) Feb 5, 2008 #10 Threaded inserts > *