Removing the motor on my type r

[dgaf 10+ year member]

Screws are out.

I've beat the thing to hell, it won't come lose.

I've heated it up, then beat it, not budging.

I've tried unscrewing it, if it was threaded on there maybe, nothing.

HOW THE F DOES THING COME OFF?!

Click to read more...

 

[tuckintaco93 10+ year member]

when i removed mine i used some flat head screw drivers and a ruber malet ...just be careful you could break the motor if you try to hard

 

[tommyk90 5,000+ posts]

Whack the basket with a rubber mallet a couple times.

If that doesn't do it, then you'll have to pry in between the basket and motor. But as posted above, be careful.

 

[Mitch86 5,000+ posts]

pry it/beat the shit out of it //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[JL Audio 5,000+ posts]

was gonna say... rubber mallet.

 

[dgaf 10+ year member]

I've been hitting it with rubber mallet, and tried laying a hockey puck over it and hitting it with a big *** hammer.

I had it sitting in an old box, with a pillow in the box, so when it came off, it would fall into it.

Still nothing.

 

[SPLaudio 5,000+ posts]

^ correct rubber mallet on the basket...

 

[ChevyRidinLow]

id use my giant muscles.