Ramos need help with car alarm

[Unregistered]

So I hear your the man with the plan, or the plans that is. I have a new 2002 Dodge Ram single cab, I just bought a crimestopper CS-2006FM. Can you help me with some wiring ideas, I have no Idea what is what or where what wire goes in this new truck. And the internet seems to be letting me down, lol. Thanks

Click to read more...

 

[Rampant_Racoon 10+ year member]

i'm thinkin about maybe buying that alarm. is it any good?

 

[ramos 5,000+ posts]

Let's see here

WIRE COLORS LOCATION

12 VOLTS CONTANT PNK/BLK IGNITION SWITCH HARNESS

IGNITION 1 DK.BLU IGNITION SWITCH HARNESS

IGNITION 2 BLK/ORG IGNITION SWITCH HARNESS

IGNITION 3 RED/WHT IGNITION SWITCH HARNESS

ACC./HTR BLOWER 1 BLK/WHT IGNITION SWITCH HARNESS

ACC./HTR BLOWER 2 ORG IGNITION SWITCH HARNESS

STARTER YEL or BLU/YEL IGNITION SWITCH

PARKING LIGHTS PPL/YEL (-) AT SWITCH

DOMELIGHT SEE NOTES

PWR DOOR LOCK WHT/GRN DR KICK PANEL

PWR DOOR UNLOCK SINGLE WIRE SYS DR KICK PANEL

TACH SENSOR TAN/RED AT COIL

BRAKE WHT/TAN (+) AT BRAKE SWITCH

HORN BLK/RED STEERING COLUMN HARNESS

NOTES:

There may be more than one BLK/ORG wire in the ignition switch harness. Please test both carefully.

Each Door has a separate trigger. The Driver front door trigger is Tan(-), the Drivers Rear Door is Tan/Orange(-). These wires are in the Driver's Kick Panel. The Passenger Front Door is Tan/Red(-), the Passenger Rear door is Tan/Yellow(-). These wires are found in the Passenger's Kick Panel. For alarms these wires must be Diode Isolated and all connected to the Negative door trigger wire. For remote starters/ and alarms when you wat to activate the domelight you can use any of these wires through a negative.

Straight from the horses mouth //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[HighSPLs 10+ year member]

Dude if you have not ever put in an alarm then I would get a qualified install to do it for you. there is to much you can do wrong to the truck if you are not careful.

 

[viper0383 10+ year member]

I put a viper alarm in a 2002 ram. I have done lots of alarm installs and this i must say was a tough one, you need resistors for the parklights, doorlocks. they are not the usual ones for chrysler. Like the previous post said, get a pro to do it.