Prototype BM v2 has arrived at SI for testing!

[bose301s 5,000+ posts]

http://www.partsexpress.com/webpage.cfm?webpage_id=3&CAT_ID=49&ObjectGroup_ID=298

I know they exist, I was going along with your post of a high quality one, some of those look decent but nothing jumps off the page.

 

[audioholic 5,000+ posts]

Awwww, just when I thought the hair pulling was about to begin.

 

[bose301s 5,000+ posts]

followed by the tender kissing of making up the mag seems to be now geared toward a whole new crowd from the previous. it may be successful, who knows

Pretty much, Nick decided to eschew SPL for building the best sounding drivers he could for a decent price.

 

[90accordman 5,000+ posts]

when i said that in a nutshell a while back everyone got butthurt

 

[audioholic 5,000+ posts]

followed by the tender kissing of making up

God you really know how to turn me on when you want to.

 

[Incriminator 10+ year member]

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[bose301s 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Haha, and I am sure you have plenty of toys.

 

[sundownz Pro Seller]

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Hey... you said I got the keep the GI Joe.

OMGZOR!

 

[sundownz Pro Seller]

followed by the tender kissing of making up the mag seems to be now geared toward a whole new crowd from the previous. it may be successful, who knows

You have that right - they are both totally different than the previous models. IMO, for what Nick is really into (SQ) the new Mag really is a big step ahead of the old.

Have not heard the new BM yet, just saw it //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[ngsm13 5,000+ posts]

It's nice to sit behind your desk and announce that we have "zilch in tooling", but that just goes to show you how little you know. Can you tell me how you know this? How much have we spent in tooling? With a comment like yours, you've got me curious as to how much we've actually spent! //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
The Mag's are shipping soon and the BM's will be quite a ways off. Sure I post pictures of prototypes on my forum, but if it makes people that mad maybe I should hold off on posting any pictures, sending out any woofers for reviews, or anything like that until production actually hits and/or arrives. Sound good? //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

I didn't say it. Just an //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

Should have quoted it...

nG

 

[mrogowski 5,000+ posts]

I didn't say it. Just an //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif
Should have quoted it...

nG

Wait a minute... Ghandi said THAT?

 

[ngsm13 5,000+ posts]

As for the comment about the TW5 vs. the BM, mainly there to stir up controversy, lol. What better way to get a product noticed than to do that. I also think that JL spends the money because they can, not because they need to, and because that way they can have all of the patents and their subs all look unique and they can say they are engineered better blah blah blah when in actuality they could have used of the shelf components and have accomplished the same goal.

One thing I will way, you are a ****ing imbicile. A zombie, walking around and knowing very little but saying quite a bit...

Hmm....




Some people learn a tremendous amount about physics and speaker properties....some of you have a pretty good grasp on how speakers are built and what makes them do what and what makes their properties change slightly or dramatically. Some of you don't.

Here is one thing some of you might know....but refuse to realize.

Some speakers...in this industry...are the EXACT SAME woofer......but appear different. And the BRAND NAME CEO's LIE and tell you they are not, they lie to their "REPS" too...they may not know different or they do and still lie...and give you mounds of horse crap and brainwash you into thinking they are telling you the truth. Personally...i know of several...that are the SAME WOOFER...but the top and bottom plates have been shaved and tampered with etc but the same amount of metal etc is in play...same internal dimensions...flux flows the same...same gause... same bl same critical mm's everywhere...

I also know of a few manuf brand name companies that say they tool their own crap.........................................and don't.......they buy off the shelf stuff from little known chingchong companies over seas and hope for the best that no-one finds where they got it from.....

The car audio market.....is full of lies.......

Lies about T/S parameters....lies about tooling.....etc etc...lies about lead times and stuff being held in customs....lies lies lies........

The only thing you can trust...................

Is when you have that woofer in your hand and test it yourself.....

And the only comparison you can make is when you have the OTHER woofer in your possession and test that one yourself as well.

Those of you that think you are "IN" with some manuf because they get on the phone with you and tell you juicy details about who knows what....you are probably in fact..."a flunky or a goon"....somebody that they fill with crap to go out and defend them on the internet.....or fluff up their persona....

Realize this............

And take all this "i know this and I know that" with a grain of salt...but the majority of is a steaming pile of crap anyway......

black00....

Marshall up in ca.com?!??!?!

nG

 

[bose301s 5,000+ posts]

One thing I will way, you are a ****ing imbicile. A zombie, walking around and knowing very little but saying quite a bit...


Marshall up in ca.com?!??!?!

nG

Whatever you say chief.

 

[ngsm13 5,000+ posts]

I'm just not a fan of hypeboys...

You could have said a multitude of other things when you created this thread... but instead you knocked a driver you never heard... and praised another driver you've never heard. Evar.

It's just laughable at best, you could have easily created an objective thread, showing everyone the information. Funny thing is, I think the driver looks nice... and with Nick's attention to detail and QC practice, I bet it will perform well. It's just the premise of this thread and how it was began that is quite irritating.

Oh well.

nG

 

[bose301s 5,000+ posts]

I'm just not a fan of hypeboys...
You could have said a multitude of other things when you created this thread... but instead you knocked a driver you never heard... and praised another driver you've never heard. Evar.

It's just laughable at best, you could have easily created an objective thread, showing everyone the information. Funny thing is, I think the driver looks nice... and with Nick's attention to detail and QC practice, I bet it will perform well. It's just the premise of this thread and how it was began that is quite irritating.

Oh well.

nG

I know, it was dumb but look where it got this thread, 10 pages and a lot of views, more people who now know about this driver than would have otherwise.