hey all, heres where i stand. i just got this idea while enameling my current worklog towers (pics by tomorrow night) and this is what i'm thinking. what i want to do is make a three-way design. i want two mids and a ribbon. the low end will come from a single 10" subwoofer side firing at the base of the speaker. now here's the problem. would I need to use an active xover with this? the reason why i ask is because it seems that i would need to power hhe subwoofer SEPARATE from the actual components. this way, when the current is introduced into the circuit, the mids and tweet get the power that they are allotted to, whereas if I were to just run a passive and have the power run to the sub as well, it wouldn't be as productive. so here's what i'm asking. how would I go about either doing a active/passive xover, or..building a powered subwoofer inside of the cabinet. that last part makes it sound simple, but there will be no visible amps, as the cones will be grilled. i need any helpful suggestions, and deletion of irrelevant posts is appreciated. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
dave
dave