Problem with Gain....

[noob with an RS 10+ year member]

and if youre using the SUBWOOFER OUTPUT RCA going to the sub amp then i highly recommend turning the subwooferlevel up to at least +10 when setting the gain. and use +10 subwoofer level as a reference to the "maximum"

 

[wilzyx 5,000+ posts]

help me get outta the red, rep my awesome paint pic please!!! //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[goose5741 10+ year member]

I should neg rep you for asking...but instead i will sit on my lazy *** and do nothing...no rep for joo!

 

[goose5741 10+ year member]

but it was an awesome pic!

 

[wilzyx 5,000+ posts]

I should neg rep you for asking...but instead i will sit on my lazy *** and do nothing...no rep for joo!

but alas, it wouldnt even matter cuz your in the red also.

 

[MiniflexAlex 10+ year member]

@ goose5741

I switched the HP-filter off at the amp.

I use just the sub sonic (any frequence lower than 25 hz wont pass)

I use just the crossover at the HU. I set it to 80hz with 12db slope

@ noob with an RE:

I had the sub out at 8, i try it tomorrow at 10 but i doubt it that this is the problem? Whats your opinion?

@ Springy 101:

your picture worked out pretty good....

Unfortunately. i have'nt a drawing program, otherwise i would create some nice picture for you //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[MiniflexAlex 10+ year member]

I go to bed now.

Tomorrow I have vacation, i want to throw the sound dampening in my trunk etc....

May be, somebody has any idea left regarding my "gain problem".

so far..... thanks guys.... I love this forum allready //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Silver 10+ year member]

this is how I thought.

notice the positive and neg.

 

[wilzyx 5,000+ posts]

this is how I thought.

notice the positive and neg.

same pic i drew, but mine has more 1337 skilz in it

 

[Silver 10+ year member]

no its not.

 

[wilzyx 5,000+ posts]

no its not.

how is it different? are you talking about how my +'s are on top and my -'s are on bottom? the sub is just turned sideways duuh //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

 

[El Ropo 10+ year member]

and if youre using the SUBWOOFER OUTPUT RCA going to the sub amp then i highly recommend turning the subwooferlevel up to at least +10 when setting the gain. and use +10 subwoofer level as a reference to the "maximum"

x 1000000000000

The sub-out doesn't start putting out decent voltage till you crank it up.

 

[SPL140.2 5,000+ posts]

Can i meassure the Volts at the pre out somehow?

Take a Digital muiltimeter and put the postive probe on the male part of the rca cable and put the negative to the outer circle //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

egg

 

[DBfan187 5,000+ posts]

Take a Digital muiltimeter and put the postive probe on the male part of the rca cable and put the negative to the outer circle //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
egg

must use 0dB tones.