Preferences on battery terminals?

[Titanbk 10+ year member]

I want to grab a few new battery terminals to throw in when I put in the equipment but I'm not sure which ones to get. I have done some looking but havent made any decisions yet. I will be running an orion 2500d so I would like to get one with 1 1/0 and 2 4 gauge. Anybody have any preferences?

Click to read more...

 

[Titanbk 10+ year member]

nobody has any suggestions?

 

[jeffs42885 10+ year member]

I like the kicker ones, and the Knu Konceptz ones are nice too...I like how they have 2 0ga's and a spot for 4ga on a ring connector on the center, plus 12.00 isnt bad either.

 

[tRidiot 10+ year member]

Except for them not fitting worth a shit?

 

[ThatChevyGuy 5,000+ posts]

i bought some kicker ones and they had this knurled adapter that came with it for my gm battery and the **** terminal took some hammer hits to go on it...

 

[tRidiot 10+ year member]

I like the kicker ones, and the Knu Konceptz ones are nice too...I like how they have 2 0ga's and a spot for 4ga on a ring connector on the center, plus 12.00 isnt bad either.

Actually, it's a 4g and a 1/0, then a rung connector... still dual 1/0 and 4g, but a slightly different configuration.

My concern is fitment issues and their lack of concern about the matter as evidenced by an email posted here last week, I think.

 

[fwb_1234 10+ year member]

Go to autozone, or better, NAPA. Buy $1.25 terminal. Attach wire with ring terminals or in provided slot. I don't really understand spending 20 bucks on terminals.

 

[SilverSquared 10+ year member]

Go to autozone, or better, NAPA. Buy $1.25 terminal. Attach wire with ring terminals or in provided slot. I don't really understand spending 20 bucks on terminals.

Or do like I did....where the 1 bolts are, attatch a copper BUSS bar, with holes drilled for mounting to the terminal, and holes in the bar for wire to connect to. I did 4 on each side of the terminal....worked BEAUTIFULLY.

 

[Immacomputer 10+ year member]

I use the cheap marine terminals from an autozone type store. They're pretty strong and cheap and can accept a good amount of wiring.