port position in a single cab pickup

[davidt487 10+ year member]

sub has to be forward

12" re sx

1.8 cu ft @35 hz 45 sq in port

right now I have a similar box with the port out the side but its not as loud as I though it would be.

my current box only has about 15 sq in of port area.

any help would be great

Click to read more...

 

[blackbonnie 5,000+ posts]

thats alot of port area for that size box

 

[davidt487 10+ year member]

1.8 cu ft after sub port and bracing displacement

2.9 cu ft gross

 

[THUMPPER 10+ year member]

wedge one end of the box and have the sub on a bit of an angle so it is

not pounding directly into the seat (get some air moving) and have the port

come out the other end shooting to the other side of the cab

or....have the port shooting forward under the seats

 

[liqdfire4755 10+ year member]

i just finished a box for my single cab sierra for a 10 diamond tdx. i have port and sub facing towards the roof. gets pretty **** loud for a ten! i can take a video of it tomorrow if you want.

 

[davidt487 10+ year member]

yea that would be great

thank for the help i dont know how i could port out the top or bottom because with 45 sq in of port area the port is like 30" so the only other way i knew to do it is out the front.

Dim. 55"X14"X7"X11"

 

[88txswol 10+ year member]

WOW...what kinda single cab you got that you can get 11" at the bottom??..just finised a box for my reg cab chevy and BARELY got like 7" at the bottom and still lost a click or two on the seat.....are you like 4 foot tall or something...LOL...

mine was 61x16x7x4.5 tuned to 32hz port on the passenger side....14.5x1.5 (~22sq inches)

seems like the best (spl) setup i have done thus far...no numbers yet, but it "feels" pretty **** loud...

 

[snfsh79077 10+ year member]

fords tend to have more room behind the seats than chevy's. I currently have a 13H x 42W x 8D and the box moves forwards and backwards because there is room between the seat and back of truck. Im 5'11" so not short.

Back on topic. I have done subs forward port forward and subs up port forward. I did cram a box behind the seat for a few days that had port and subs up. Personally I liked the subs up and port forward. Ive had the port in the middle and off the side. Cant really give an opinion on differences because one was made for sq and the other for spl. the spl one had the port on the side.

 

[zierbox 10+ year member]

 

[snfsh79077 10+ year member]

sexy install...one of your creations I suppose?

 

[bigbowtie 10+ year member]

dang thats pretty clean work

 

[Blove1991 10+ year member]

The most I could fit in my S10 was 3ft^3NET at 35hz with 45sq of port with port blowing towards driver side

 

[88txswol 10+ year member]

now THAT is a sexy summuhmuhbiotch!!

what kinda truck?

what are the dimensions of that beast??

i got ideas swirling in my head now...LOL

my fvkn 60/40 bench makes it even more challenging...

 

[duece212 5,000+ posts]

If I had a single cab I'd be talkin to tommyk90 to get ideas...

 

[davidt487 10+ year member]

wow thats a sexy box

zierbox were are you at in tx i would live to do something like that

most i could get was 2.9 cu ft

i'm 5' 10" but very rarely does someone sit in the passenger seat so i leave it flipped up most of the time.

i dont see any way i can do sub up in my truck