Pics of my install progress *not 56k friendly*

Randy Savage
5,000+ posts

CarAudio.com Veteran
Well today I finally got around to working on my install...spent all day on the enclosure, it's working out very nice thus far- the baffle still has to be cut, the box needs to be sanded down and painted, and that's about it....here are some pics of the progress for today-

box10va.jpg


First shot of the unfinished box- it works out to be 7.2 ft^3 net after port displacement- the woofers will be inverted. It's got 100 in^2 port, tuned to 32hz.

box21jd.jpg


Here's a closeup of the port- it is painted a 'hardened' black- came out very nice IMO.

box34tx.jpg


Here's a shot of the box almost in one piece...the baffle still needs to be mounted, but cannot be seen here.

box40pg.jpg


We had to do some test fitting- the woofers come a little too close to the roof of the truck, so we decided we will flush mount them inverted- which will be done tomorrow. The Sledgehammer will also have quite the amp rack as well //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

box54oy.jpg


Another trunk shot, as my friend Andrew looks on...(yes Steve, that's Goldberg)

Check back tomorrow for some updates //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Another trunk shot, as my friend Andrew looks on...(yes Steve, that's Goldberg)
Looks good so far //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

I seen the picture and thought ... "Hey, Goldberg is back." before scrolling down and reading that quote //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

That's going to be quite the site when you look in your rear view ... when it's not turned on, that is //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

- Steve

 
jesus ****. thats a huge sub\amp\box.

hammer = teh own.

did you end up modding it like i showed ya //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

prolly not. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

anywo. keep us updated!

NICE JOB!

//content.invisioncic.com/y282845/emoticons/needpics.gif.edd6d28e76618c28c46f343991bcced5.gif

 
i was like **** that negro is black ahahaha
//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif :laugh: //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif :laugh: //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif thanks for the laughs

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Randy Savage

5,000+ posts
CarAudio.com Veteran
Thread starter
Randy Savage
Joined
Location
New York
Start date
Participants
Who Replied
Replies
39
Views
2,056
Last reply date
Last reply from
Pistonsfan70
IMG_20260506_140749.jpg

74eldiablo

    May 22, 2026
  • 0
  • 0
design.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0

New threads

Top