phase setting on amp?

[deLeo 10+ year member]

what does it do? i tried a search but came up with nadda so i figured id make a thread.

it says phase and then one side is 0degrees and the other is 180degrees wtf does this thing do?

Click to read more...

 

[deLeo 10+ year member]

amp is a hifonics bxi series if that matters

 

[deLeo 10+ year member]

^^^^

 

[Trey803 5,000+ posts]

reverses polarity

 

[deLeo 10+ year member]

so dont touch it? lol

 

[Trey803 5,000+ posts]

depends if you sub stage is out of phase or not

 

[FurbiesAndBeans 10+ year member]

Im gonna thread jack

On my directed 1100d, there's a switch that goes to slave, then master. The master side of the switch has 2 modes, 0 and 180. I know that's the phase. But there is also another phase switch in the amp. Should both of them be at 0 or 180? im confused to what happens if i put the master switch on 0 then the phase switch on 180.

 

[azimuth 5,000+ posts]

Im gonna thread jack
On my directed 1100d, there's a switch that goes to slave, then master. The master side of the switch has 2 modes, 0 and 180. I know that's the phase. But there is also another phase switch in the amp. Should both of them be at 0 or 180? im confused to what happens if i put the master switch on 0 then the phase switch on 180.

they can be strapped, which you probably know is the reason for slave and master. i would guess that one is for adjusting both amps when strapping.