it'lldo
Junior Member
I have a pair of Hertz ML 1600 mid bass woofer. I will be using the Amp to cross over the bottom end. What do I need to set the top side to 400 Htz@ 12 db slope or 18 db slope.
-
2Participant count
-
Participant list
- Thread Starter
- #2
I called Parts Express and they have what I need. Parts are on the way.
keep_hope_alive Premium Member
Acoustics Engineer
are you running the ML1600 as a midbass only? what made you choose the 400Hz point?
good call with Parts Express. I would have pointed you there anyway.
The Mille woofers sound great and don't really need a low pass filter if the T/A lets them blend with the mids/tweets.
good call with Parts Express. I would have pointed you there anyway.
The Mille woofers sound great and don't really need a low pass filter if the T/A lets them blend with the mids/tweets.
Activity
No one is currently typing a reply...
Similar threads
Agreed. I was actually thinking of building a 3-way passive and I compared the cost to a Dayton DSP and it makes no sense to go passive.
- Started by GoT_2B_BuMpN
- Wiring, Electrical & Installation
You're not trying to figure out the mass of air in your 3" port or whatever, you're trying to figure out the mass of air that you would need in an...
- Started by Evyn1
- Enclosure Design & Construction
well they list that frequence response so I will try to use it. Also, does it help to have the marine speakers in their towers for such a thing...
Yep. It would be a little over 3 wired in series, but that’s fine.
- Started by 2RZ-FE
- Speakers
It'll sound like a 12" sub in a bandpass enclosure
- Started by Evyn1
- Enclosure Design & Construction 2
About this thread
- Start date
- Participants
- Who Replied
- Replies
- 2
- Views
- 497
- Last reply date
- Last reply from
- keep_hope_alive
