Ok guys, have it this problem/stumper!!

[JimJ 5,000+ posts]

My thoughts exactly...

 

[JimJ 5,000+ posts]

but there is something more than just deadening that he is missing

Contender for "Understatement of the Month"...

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[bimma85 5,000+ posts]

Contender for "Understatement of the Month"...
//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif, my amp has an xover? whats that? //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif//content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 

[ls1pimp 10+ year member]

//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif

I use the headunit crossover, not the amp. I shut the amp crossover off.

 

[ss3079 5,000+ posts]

I use the headunit crossover, not the amp. I shut the amp crossover off.

//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif

 

[JimJ 5,000+ posts]

I use the headunit crossover, not the amp. I shut the amp crossover off.

I believe that was his point...

 

[iceteebone 5,000+ posts]

how about you deaden the doors, and set the xover properly on the amp.

 

[ls1pimp 10+ year member]

Don't worry about the amp, i had the exact same problem when i was running my old speakers right off the HU.

 

[ls1pimp 10+ year member]

how about you deaden the doors, and set the xover properly on the amp.

I turned the HU crossover off and set the amp HPF to 100hz, and same problem was there.

 

[theCybe 5,000+ posts]

IDEALLY, you want to get the full signal out of the headunit (unboosted, uncrossed-over, unf*ckedup) to each amp (or external crossover) and THEN make your adjustments from there.

Set all your headunit shit at 0, OFF, NONE, whatever.

And then tune with the amps.

 

[iceteebone 5,000+ posts]

or have your friend install your system, since you seem to have so many problems.

 

[ss3079 5,000+ posts]

Don't worry about the amp, i had the exact same problem when i was running my old speakers right off the HU.

No one has a problem with the amp.

Of course you're going to experience little to no midbass running a component set off of the head unit anyway ... let alone amping a set and trying to dick around with the pre-set crossover points on the head unit.

Trust me, I went from running my CL-61's off of the head unit to running them off an amp ... difference was night and day. I set my Alpine flat, adjusted the amp. In fact, I like how it sounded so I didn't even bother adjusting the unit for quite some time.