etbrown4
Junior Member
Newbie needs help with Sony xnv660BT, trying to test operate on bench
This has to be the simplest forum question ever.
Trying to test run this Sony unit on a bench before installing, to make sure it works!
I've grounded the black lead, I then joined the yellow and red together and applied 12v to those two.
(Sony shows yellow hot all the time and red is a switched 12v)
Unfortunately I can't get it to power on.
I've tried the reset, with no effect.
Curious if possibly the orange with white tracer, "illumination" wire needs 12v, maybe?
The only on/off button I see on the 660 is hitting the 'source' button.
Tips appreciated!
This has to be the simplest forum question ever.
Trying to test run this Sony unit on a bench before installing, to make sure it works!
I've grounded the black lead, I then joined the yellow and red together and applied 12v to those two.
(Sony shows yellow hot all the time and red is a switched 12v)
Unfortunately I can't get it to power on.
I've tried the reset, with no effect.
Curious if possibly the orange with white tracer, "illumination" wire needs 12v, maybe?
The only on/off button I see on the 660 is hitting the 'source' button.
Tips appreciated!
Last edited by a moderator: