New System Setup

RainStryke
10+ year member

Member
Hi, I just bought a new system... Ive installed one before... but this one a much higher end system than my other...

System specs.

AMP: Audiobahn A2300HCT

Sub: Audiobahn Immortal 15" AWIS15P

Cap: Audiobahn 1 Farad

Wires: 2GA 80AMP fuse Power Acoustik

How do I set it to 1ohm?

How would I wire that on a 2 channel amp?

 
Yeah take the cap back if your trslly gonna use it, since you dont have a battery or the big 3 what so ever. Why: The cap isnt big enough to even try, and since you want it a 1 ohms at 2400 rms expect huge light dimming on your stock. 1 farad equals a band aid for 1000 watts. so your missing 1400 buddy. Too big of a system for stock. AT LEASt get a battery

 
just saying if you want a nice system you would be better off starting from scratch and taking tips from people who have already been there and done that. My first system ever was an audiobahn, and it was the biggest waste or $250 ever

 
just saying if you want a nice system you would be better off starting from scratch and taking tips from people who have already been there and done that. My first system ever was an audiobahn, and it was the biggest waste or $250 ever

totally agree because my first system was audiobahn to, and they pretty much blow

 
The amp lists 2400w rms X1 at 1OHM on the audiobahn site...

The Immortal sub sucks? Why?

Why does my amp ****, your saying it wouldnt support what the site says?

Sucks I come on here and all people have to just say my system is a piece of shit... I just wanted to know a simple questions and out of the 11 posts I didn't get an answer.

 
The amp lists 2400w rms X1 at 1OHM on the audiobahn site...
The Immortal sub sucks? Why?

Why does my amp ****, your saying it wouldnt support what the site says?
What they list does not always equal what an amp should put out

The sub sucks because it's Audiobahn, though i do remember they did make some non-flaming Immortal that were pretty good. Yours...is not it.

Your amp sucks because it is the same reason as to why your sub sucks.

 
they benchmark there own amps and can pretty much say it will put out any power they want to say it will. The sub is made poorly and has a good chance of failing and falling apart. Also even if that amp did put out 2400wrms your electrical could never sopport that stock and you would end up clipping your amp or sub and blowing one of the two or both. Sorry I wasnt here to bash you but to just say if you could return them I would otherwise install them and play them and maybe upgrade in the future if they dont meet your needs.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

RainStryke

10+ year member
Member
Thread starter
RainStryke
Joined
Location
Kansas
Start date
Participants
Who Replied
Replies
44
Views
2,067
Last reply date
Last reply from
patotay
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top