GrandMaster
Hustlin'
Hey everyone, im new here as im sure you can tell.
i have a question in regards to me new amp.
i just purchsed a new Rockford fosgate amp, i made all the connections... ground, fuse.... etc, the Poew light is ON .. on top of the Amp... however, there is no sound comming out of the Subs!
i checked all the wires and connections, and everything looks good!//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
all that i have is 2 12'' subs, and the new Amp to push 300BMR's ( or whatever) per speaker. i dont have the exact details of the amp, but if nessessary its not a problem.
the subs are to run off the radio, cd player... etc there is NO deck, it is the cars factory deck which cant be replaced. i know this set up is ok, the previous owner had his set up fine.
no fuses are poped, no burning smells... nothing.
music is fine, its just not playing thru the Subs. the Pos& Neg connections are corret also.
My previous AMP's Fuse kept poping! so i decided to get a new amp to check and see if it was the AMP or a Ground issue, appears to be the Old amp turnt to crap.
ANY feedback would be greatly appreceiated.
much thanks
GM
i will also let you know how everything worked out.
i have a question in regards to me new amp.
i just purchsed a new Rockford fosgate amp, i made all the connections... ground, fuse.... etc, the Poew light is ON .. on top of the Amp... however, there is no sound comming out of the Subs!
i checked all the wires and connections, and everything looks good!//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
all that i have is 2 12'' subs, and the new Amp to push 300BMR's ( or whatever) per speaker. i dont have the exact details of the amp, but if nessessary its not a problem.
the subs are to run off the radio, cd player... etc there is NO deck, it is the cars factory deck which cant be replaced. i know this set up is ok, the previous owner had his set up fine.
no fuses are poped, no burning smells... nothing.
music is fine, its just not playing thru the Subs. the Pos& Neg connections are corret also.
My previous AMP's Fuse kept poping! so i decided to get a new amp to check and see if it was the AMP or a Ground issue, appears to be the Old amp turnt to crap.
ANY feedback would be greatly appreceiated.
much thanks
GM
i will also let you know how everything worked out.