new box design*pics*

[CBFryman2 5,000+ posts]

there ya go

worst diagram ever.

It would be better if you mounted the box to the bottom of the deck.

 

[ssj2xxgotenxx 10+ year member]

worst diagram ever.
It would be better if you mounted the box to the bottom of the deck.

What he said + Fiberglass / MDF baffles to make the ports mount flush in the 6x9 location / no janky wiring job.

 

[mikey060 10+ year member]

well im finished the box. it unimpressed me with the kenwood in it, running off of the kenwood amp. but after school i will throw the Apocalypse in and do some damage:up2somet:

aeroport+elbows



port holes cut out



ports in place and screwed in





In trunk

 

[mikey060 10+ year member]

worst diagram ever.
It would be better if you mounted the box to the bottom of the deck.

haha werd, took like 2 seconds

anyways, ya i was considering that but there wasnt as much room as i imagined

 

[mikey060 10+ year member]

look at those cute aeros



uh oh, where did they go?'

 

[mikey060 10+ year member]

VidS OR DIE!!!!

when AP is installed ina few hours, then the mayhem will be filmed

 

[mikey060 10+ year member]

last pic



thanks for all the feedback.please discuss further, i would like to know what everyone think of the design. i think given more design time and not just kinda thrown together, this design could have a lot of potential

 

[LeofromtheH 10+ year member]

lolwow, looks like some type of plumbing mishap

 

[Flipx99 5,000+ posts]

I wonder what it's tuned to?

 

[grillman6000 10+ year member]

lolwow, looks like some type of plumbing mishap

lol X2....thats wut im sayin...

 

[BayAreaBass 10+ year member]

lolwow, looks like some type of plumbing mishap

rofl

 

[kicker06 10+ year member]

How does it sound? A lot louder than before?

Those Cover's will restrict airflow, a lot.

 

[Cam 10+ year member]

So if it works out are you gonna take it apart and make it like... good?

 

[Immacomputer 10+ year member]

I think the design looks pretty terrible and the construction even worse. The ports completely firing into the cabin and the sub completely in the trunk would seem to cause a peak around tuning and very limited output above tuning. The port is not the only contributing part of the system. If this was a bandpass enclosure, it would be a different story. Here, you're going to deal with a ton of reflections coming from the trunk and you could get some serious cancelation problems due to the difference of distance.

It also appears to be tuned pretty high.

 

[mikey060 10+ year member]

lolwow, looks like some type of plumbing mishap

lol no shit.