Need Prof opinion on this please.

[scarolinablazin 10+ year member]

BTW how far from anderson are you??? thats where i am. i can help better if you need it in person. for free unless of course i were to actually be hooking it all up.

 

[scarolinablazin 10+ year member]

so that web site wiring diagram is the way im suppose to wire it?

is it dual or single coil?? i don't know if they make a single or not so i have to ask.

 

[fastball11 10+ year member]

dual coil. I am located in Greer. Everything like amps and all are hooked up, only thing i would need to hook up is the sub in the box. But yah that would be great if you would like to help me out, i can do it anytime tomorrow after 3:30

 

[scarolinablazin 10+ year member]

ok if its dual 2 then hook it up like the diagram you posted to get a 4 ohm load. when you get the second one wire it up the same and then your amp will see a 2ohm load. if you have any questions after that or whatever just pm me your number and i'll try to call and talk you through or something. if you still feel you need help you can come here and i can double check it all for you.

 

[lilmaniac2 5,000+ posts]

http://www.bcae1.com

don't install anythign else until you have spent 2 days reading on that site.

 

[fastball11 10+ year member]

ok if its dual 2 then hook it up like the diagram you posted to get a 4 ohm load. when you get the second one wire it up the same and then your amp will see a 2ohm load. if you have any questions after that or whatever just pm me your number and i'll try to call and talk you through or something. if you still feel you need help you can come here and i can double check it all for you.

Thanks you sir very much, i apperciate much, now i know what to do. thank you for your time and patience

 

[sexiewasd 10+ year member]

http://www.bcae1.com
don't install anythign else until you have spent 2 days reading on that site.

X2

Don't skip this post OP, I REPEAT, DON'T SKIP THIS POST! It's probably the most informative answer in this thread.

 

[fastball11 10+ year member]

anyone think my amp with this 2 ohm speaker dual voice coils at a 4ohm load from the amp would blow them?