Need Power/Speaker Pinout

[BlackBart]

Does anyone have the pinout for a Kenwood KDC-716S CD Receiver .

The 16 pin connector on the back of receiver.

Thanks, Black Bart

Click to read more...

 

[bonesninja 5,000+ posts]

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=32812&item=5770967723&rd=1

 

[BlackBart]

Thanks but I dont need the cable, I just need to know which pins are for ground,

ign, batt. speakers, etc.

A freind asked me to look at a problem with it and I want to make sure I dont

connect it wrong.

He has had the unit replaced and no longer has the cable.

Black Bart

 

[cjjackson85 5,000+ posts]

Page 30?... ftp://docs.kenwoodusa.com/manuals/OM-KDC-V7017-2001-KUSA.pdf

 

[bonesninja 5,000+ posts]

oh i c ---- sorry man i checked the owners manual but didnt find a diagram.

 

[BlackBart]

Jackson85, Still not what I'm looking for, I do not have the cable, I just

need to know which pins are for what function.

Like if you're looking at the back of the radio, you have 2 rows of 8 pins and I need to know that pin 1 on bottom row left to right is ground or whatever it actualy is. Kenwood does not have that info on their site.

Thanks, Black Bart

 

[bonesninja 5,000+ posts]

although you know---if you bought the harness you would not have to figure it out. just my opinion.

 

[BlackBart]

Yes thats very true, but I really dont need to connect but probably 3 wires

to it , just enough to get power to the display .

Battery , Ground (probably case) and Light dimmer control , as I said I just

dont want to apply power to a speaker output and make the problem worse.

If someone has a cable and can tell me which color wire goes to which pin

I can figure the rest.

Thanks for everyones help so far,

Black Bart