trunks9_us
10+ year member
CarAudio.com Elite
OK i got this box made 4 yrs ago for my other car but it was a ported box for 2 12's. It was for 2 pioneer premiere ts-w12prs subs. Now i am not sure what the sub actually calls for on ported box but the is a review & Klippel Data on this sub here http://www.diymobileaudio.com/forum/...newthread&f=24
The box is pretty big Here is the outer dimensions of the box
Height:12.5
Width:36
Length:26
I am using 3/4 mdf wood
Here is the port length
Width: 4.5
Length: 11
Depth: 18
I am trying to figure out for one what this box is tuned at hz wise and also is this box the right box for those subs. I was powering these subs with a phoenix gold xenon 600.1 at that time and they hit really hard. Now heres the thing i only have one of the subs so what i was going to do was use the box in my new car with one of the subs in there powered by a zapco 2.0 (1x400 rms) then put a blown treo ssx in the other sub spot not powered. My main concern is that by not using the other side that the sub working wont be doing its job right . I am not sure which is why i came here for help. If someone could help me out with the box calculations or maybe even give me a box program to use to figure this out on my own I have never used a box program so i would not know what i am doing but i do want to learn.
The box is pretty big Here is the outer dimensions of the box
Height:12.5
Width:36
Length:26
I am using 3/4 mdf wood
Here is the port length
Width: 4.5
Length: 11
Depth: 18
I am trying to figure out for one what this box is tuned at hz wise and also is this box the right box for those subs. I was powering these subs with a phoenix gold xenon 600.1 at that time and they hit really hard. Now heres the thing i only have one of the subs so what i was going to do was use the box in my new car with one of the subs in there powered by a zapco 2.0 (1x400 rms) then put a blown treo ssx in the other sub spot not powered. My main concern is that by not using the other side that the sub working wont be doing its job right . I am not sure which is why i came here for help. If someone could help me out with the box calculations or maybe even give me a box program to use to figure this out on my own I have never used a box program so i would not know what i am doing but i do want to learn.