kr15 5,000+ posts
Polluting Residentials
I just noticed that its 25 gross, not net. Ya a 4th would cut it close. You could absolutely do like a 1:1 or small ratio, which will sound great, but wont be as loud as a flat wall
seriously wood not do mdf for your wall. 11 layered sanded ply is a much lighter and stronger choice of wood.Yeah i probably wont mess with a 4th now that i think about it. I was thinking about dojng a shell of 2x4s with expansion foam behind that and then doing a doubke layer of mdf for the walls and doing 3-4 baffles plus a faceplate. Is that gonna cut too much of my depth? I only have like 22-24 inches of depth from the seat to the back of the cab to play with
11 layer sanded ply? Is that like birch?seriously wood not do mdf for your wall. 11 layered sanded ply is a much lighter and stronger choice of wood.
the so called 60 dollar a sheet birch from home depot, yeah thats just sanded pine with a birch thin layer of veneer but double the cost.11 layer sanded ply? Is that like birch?
Like Jeff said, plywood is better.Yeah i probably wont mess with a 4th now that i think about it. I was thinking about dojng a shell of 2x4s with expansion foam behind that and then doing a doubke layer of mdf for the walls and doing 3-4 baffles plus a faceplate. Is that gonna cut too much of my depth? I only have like 22-24 inches of depth from the seat to the back of the cab to play with
Is it going to make a huge difference going with pine rather than birch?Like Jeff said, plywood is better.
I don't go to home depot though. I get the real birch, not pine with a layer of veneer.
No clue. I don't use pineIs it going to make a huge difference going with pine rather than birch?
Nowhere near 100 pounds, lolWhat IS the approximate weight savings over MDF?.. I think 3/4" MDF is almost 100 lb a sheet, what does a sheet of 3/4" birch weigh approximately?.. if I ever change up and go bigger I would like most of the extra weight in the subs... LOL!
OK... then how much does 3/4 birch plywood weigh?... I know it's less... but not how much... just curious...I had 23 cubes net for my 2 18" 4th order. Don't think you will have enough.
MDF is 96 pounds a sheet.
"Birch" or real Birch. Home depot and lowes birch is Pine with a stupid thin birch veneer. Butttt. 68 pounds.OK... then how much does 3/4 birch plywood weigh?... I know it's less... but not how much... just curious...
Is REAL birch even lighter?.. does it cost more?"Birch" or real Birch. Home depot and lowes birch is Pine with a stupid thin birch veneer. Butttt. 68 pounds.
Real baltic birch is 48 pounds but comes in 5x5 sheets.Is REAL birch even lighter?.. does it cost more?