NEED help from an enclosure designing wizard!

[Chrishxc718]

I’m putting together a 6th or 4th order wall everything BUT design and specs is ready to go, that’s where the wizard comes in lol. I mean looking for someone who could whip me up something that will get low but get a little higher as well. I’ve tried doing this myself but I’m just not that great at it. I already have the car measured out. I would really really REALLY appreciate anyone’s help! Thanks for reading! I guess I could include what I’ll be running lol. 4 Skar EVL 15’s pushed by a Soundigital 12k powered by a Singer 240 H/O, 5 Kinetik HC-1200’s and an assortment of Krank it up batteries. Plan to add more batteries as the build goes on but that’s just what I have on hand still in the packages begging to be released lol. The vehicle is an 04 Santa Fe

Click to read more...

 

[Boomin_tahoe 5,000+ posts]

You ever done anything like this before?

 

[shredder2]

Sounds like itll get down for sure... in a Santa Fe?... lordy!

 

[Boomin_tahoe 5,000+ posts]

Sounds like itll get down for sure... in a Santa Fe?... lordy!

Can you design walls yet? Your sub enclosures are superb...better than mine.

 

[shredder2]

Can you design walls yet? Your sub enclosures are superb...better than mine.

Not playin with a 4th or god forbid a 6th... lol... maybe something ported only.

 

[Boomin_tahoe 5,000+ posts]

Not playin with a 4th or god forbid a 6th... lol... maybe something ported only.

Wouldn't think it'd be too hard to do. Something like what Boogerman has. Just bigger/wider pieces of wood. I'd try it but my Sketchup 30 day expired //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[Papermaker85 5,000+ posts]

Lord help humanity

 

[shredder2]

[quote name='Boomin_tahoe']Wouldn't think it'd be too hard to do. Something like what Boogerman has. Just bigger/wider pieces of wood. I'd try it but my Sketchup 30 day expired [/QUOTE]

Its more than scale... @BoogerMan has a superbly done box and ill wager it's designed with a ton of insight and hard won experience. Don't think a 6th is easy to design. Even a 4th would require a lot of insight to get it right on the 1st try. It's way beyond my comfort level to do one for someone else.

 

[Chrishxc718]

As in on the same level or in general? Lol in general yeah but not to this extent

 

---------- Post added at 05:34 PM ---------- Previous post was at 05:33 PM ----------

 

Lol

 

[Chrishxc718]

If you wanna come up with a sick ported I may just go that route because I am having a hard time finding someone to design a 4th or 6th lol

 

[Chrishxc718]

A huge port would be dope, I picked up some stainless for the dancers

 

[shredder2]

If you wanna come up with a sick ported I may just go that route because I am having a hard time finding someone to design a 4th or 6th lol

A huge port would be dope, I picked up some stainless for the dancers

IDK your measurements... that might help.

 

[THATpurpleKUSH 5,000+ posts]

3:1 4th order tuned between 42-50hz. You will probably have to do some testing with the port to get it exactly how you want it.

 

[Chrishxc718]

IDK your measurements... that might help.

This is down the middle with no wheel wells or anything in the way. H 43x W 41x L 68

Would like to keep a foot or two in the rear for amps and batteries

 

[THATpurpleKUSH 5,000+ posts]

1.5cf per sub on the sealed side gives you 6 sealed 18 ported. 16-20sq inches of port area per cube puts the port around 288-360sq inches of opening. You could probably go up to 2cf sealed per sub and adjust the ported side accordingly.