Need Help Choosing an Amp

  • 2
    Participant count
  • Participant list

DrzCrazyNigga

Junior Member
I have a 2007 honda CR-V and I'm installing two 12' 18 sound 12mb1000 midrange loudspeakers and three beyma CP22 Super Tweeters and one 18 sound HD2080T 2' HF Compression Driver which will be put into a cabinet speaker box in my car and a for subs Kicker Solo X 18 Dual 4 ohm if any one has any suggestions on amps to power all this i thinking of running a two channel amp for the two midrange speakers and a four channel amp for the three tweeter and Driver any ideas and amps recommendations

18 Sound 12MB1000 Specs:

Nominal Diameter 300 mm (12 in)

Rated Impedance 8 Ohm

AES Power 600 W

Program Power 800 W

Peak Power 1600 W

Sensitivity 102 dB

Frequency Range 80 ÷ 3500 Hz

Power Compression @-10dB 0,5 dB

Power Compression @-3dB 1,5 dB

Power Compression @Full Power 2,1 dB

Max Recomm. Frequency 2500 Hz

18 Sound HD2080T Driver Specs:

Throat Diameter 50 mm (2 in)

Rated Impedance 8 Ohm

DC Resistance 6,2 Ohm

Minimum Impedance 8 Ohm at 3500Hz

AES Power 100W above 1,2 kHz

Program Power 200W above 1,2 kHz

Sensitivity 109 dB

Frequency Range 500Hz ÷ 20kHz

Recomm. Over Frequency above 800Hz (12dB/oct slope)

Beyma CP22 Tweeters Specs:

Impedance 8 ohms

Minimum Impedance 8.5 ohms @ 9.0 khz

D.C. Resistance 6.1 ohms

AES Power Rating 25 Watts

Program Power 50 Watts

Sensitivity (1W/1m) 107dB SPL

Frequency Response 4kHz - 20kHz

Recommended Crossover 5.0 kHz or higher

Dispersion (H x V) 40° Conical

Voice Coil Diameter 1.5" / 37.6mm

Magnetic Assembly Weight 2.64 lb. / 1.2 kg.

Flux Density 1.55T

BL Factor 5.2 N/A

Kicker Solo X 18 Specs:

Subwoofer Series SoloX

Subwoofer Size 18"

Peak Power Handling 10,000 watts

RMS Power Handling 5,000 watts

Voice Coil(s) Dual

Impedance (Per Voice Coil) 4 ohms

Voice Coil Diameter

Frequency Response 18 - 100 Hz

Sensitivity 90 dB

Xmax (millimeters) 24.5 mm

 
Last edited by a moderator:
I have a 2007 honda CR-V and I'm installing two 12' 18 sound 12mb1000 midrange loudspeakers and three beyma CP22 Super Tweeters and one 18 sound HD2080T 2' HF Compression Driver which will be put into a cabinet speaker box in my car and a for subs Kicker Solo X 18 Dual 4 ohm if any one has any suggestions on amps to power all this if any one has any suggestions on amps to power all this i thinking of running a two channel amp for the two midrange speakers and a four channel amp for the three tweeter and Driver any ideas and amps recommendations

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Here is my thought, theory. Those speakers are 80w rms. Half of that is 40w rms. Add the 40 to the 80 and you get 120w. Get an amp that is 120w...
2
2K
It depends on how cheap you wanna go but I've had excellent results with a 12inch power acoustic gothic sub in a small sealed enclosure for budget...
72
8K
I have 2 Sundown SA10v2 (1000w version) and just replaced my RF R1200 with a T-1500.1bd and OMG! I was considering Ampere Audio, JP23, Sundown...
5
2K
well, thats kind of an open ended question....., you can do 2500rms@1ohm, or you can do a pair of 1k-1200rms@2ohms. just have to know the amp...
5
2K

About this thread

DrzCrazyNigga

Junior Member
Thread starter
DrzCrazyNigga
Joined
Location
Milltown NJ
Start date
Participants
Who Replied
Replies
3
Views
397
Last reply date
Last reply from
DrzCrazyNigga
1717274743729.png

Doxquzme

    Jun 1, 2024
  • 0
  • 0
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0

New threads

Top