basscort2009 5,000+ posts
Banned
ok i have a double angled wedge style box im going to make. i have all the dims and ideas of cubes and tuning. i just need the cut sheet and the amount of angle on each cut.
its for a level 6 18 in about 3-5 cubes depending on what the airspace and port turn out.
MAX DIMS are...
width- 36.5
top depth- 21
bottom depth 28
front height 19
back height 17
would like it tuned to 36 with 20 inches of port per cube. no more no less please. double baffle NOT flush mount. NO 45s. account for about .25 in bracing like allthread and 2x4 please. and sub takes .25 cubes as well.
will PP someone for a good design
its for a level 6 18 in about 3-5 cubes depending on what the airspace and port turn out.
MAX DIMS are...
width- 36.5
top depth- 21
bottom depth 28
front height 19
back height 17
would like it tuned to 36 with 20 inches of port per cube. no more no less please. double baffle NOT flush mount. NO 45s. account for about .25 in bracing like allthread and 2x4 please. and sub takes .25 cubes as well.
will PP someone for a good design
