Need Box plans for 18.

[DropBasss 10+ year member]

Well i'm tired of bumping my sorry *** 12" W3 and I wanna step it up and put my Kicker Comp 18" CV in the Grand Cherokee, But I'm not that talented with math and box calculations and what not.

So if someone could please help me out with some plans that would be great.

I have 27" Depth, 31" Height, 41" width to work with. Anything between would be great. As long as its over 5.0 Cu. Ft.

I was also thinking about the sub facing towards the front of the Jeep. And right inbetween the headrests and port facing back. For this to happen the bottom of the sub would have to be atleast 20" high from the floor. Kinda like a wall.

But ya'll are the experts tell me what should be the loudest for my setup.

Thanks Alot, DropBasss

Click to read more...

 

[CBFryman2 5,000+ posts]

Sub up, port back FTW.

 

[mazdakid 5,000+ posts]

sub back port back ftw

 

[skadude016 5,000+ posts]

Well i'm tired of bumping my sorry *** 12" W3 and I wanna step it up and put my Kicker Comp 18" CV in the Grand Cherokee, But I'm not that talented with math and box calculations and what not.
So if someone could please help me out with some plans that would be great.

I have 27" Depth, 31" Height, 41" width to work with. Anything between would be great. As long as its over 5.0 Cu. Ft.

I was also thinking about the sub facing towards the front of the Jeep. And right inbetween the headrests and port facing back. For this to happen the bottom of the sub would have to be atleast 20" high from the floor. Kinda like a wall.

But ya'll are the experts tell me what should be the loudest for my setup.

Thanks Alot, DropBasss

I know this has nothing to do with your question but i have the exact same model Jeep as you. how much did it cost to lift it? and what kit did u use?

 

[DropBasss 10+ year member]

I choose the 2" Teraflex Budget Boost at first, and added a Teraflex tracbar front and rear, JKS quick disconnects.

Very easy to install and can prolly be had on ebay for under $200-300.

It pretty much like a spacer that goes on top of the spring.

also check out RubiconExpress.com , BTW for future reference if you don't know already your model is considered a ZJ.

 

[DropBasss 10+ year member]

so how much does it cost to get a box designed?

 

[80INCHES 5,000+ posts]

u need 2 throw 5-600watts to your w3 for it to really do its thing

80

 

[DropBasss 10+ year member]

I'm running 1100 to it now.