Need box design for 4 12" type R's

[eskimochaos 10+ year member]

Looking for ported box plans for 4 12" type R's to be powered by one AQ2200D.

Max dimensions 36" width 20" height 24" depth....is that big enough

Would like subs firing up, port back for my SUV.

Any other recommendations please LMK....I have no idea the tuning or cubes thanks!

Click to read more...

 

[PSturmer 10+ year member]

here was my 4 12'' type r setup. powered by 4 bxi2607ds.

here is one of my friends setup with 4 12'' rs. powered by 2 bxi2006d's. 7.5 cubes net @ 35hz.

your going to want something like the second setup for daily. you need another amp also. run each amp at 1 ohm nominal. 7 cubes net. 5 4'' aeros seems to work good for daily setups like this.

 

[eskimochaos 10+ year member]

here was my 4 12'' type r setup. powered by 4 bxi2607ds.

here is one of my friends setup with 4 12'' rs. powered by 2 bxi2006d's. 7.5 cubes net @ 35hz.

your going to want something like the second setup for daily. you need another amp also. run each amp at 1 ohm nominal. 7 cubes net. 5 4'' aeros seems to work good for daily setups like this.

Thanks, Im looking to run all 4 off one AQ2200D @ 1ohm....550RMS each

 

[jake the ssnake 10+ year member]

here was my 4 12'' type r setup. powered by 4 bxi2607ds.

here is one of my friends setup with 4 12'' rs. powered by 2 bxi2006d's. 7.5 cubes net @ 35hz.

your going to want something like the second setup for daily. you need another amp also. run each amp at 1 ohm nominal. 7 cubes net. 5 4'' aeros seems to work good for daily setups like this.

Did you ever meter your friends setup, I'm getting ready to do that same build (4 type R's/ 2 2006D's)