need box design for 3 SA-10's

[nate56 10+ year member]

like title states need a design or design help, my dimensions are 38Wx20Dx16H would like subs up port back and will be powered with about 2000 watts

Click to read more...

 

[dbeez 5,000+ posts]

What vehicle what's your goals with this

 

[nate56 10+ year member]

its in a 96 S-10 blazer and goals are DANG THOSE ARE 10'S

 

[double 07 10+ year member]

I like THE GOAL!!!!!!........Good luck sir....Sounds like a plan...

 

[shadow 10+ year member]

@pro-rabbit can build u one...

 

[dbeez 5,000+ posts]

Do you want it designed and built.

 

[nate56 10+ year member]

just designed catman got everything under control now //content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif

 

[dbeez 5,000+ posts]

Ok sorry but I don't just design if I'm not building look forward to seeing the build though.

 

[pro-rabbit 5,000+ posts]

Should be a fun design/build. We have done one of those setups before we walled off the blazer. If done right, it should perform very very well.

I don't suggest subs up at all for this application though unless it simply has to be that way. During our testing with a similar setup we found that while it was .2db louder on the meter it did not perform on how we wanted it to.

 

[Loudmp5 10+ year member]

What do you mean not perform how you wanted it to om doing 3 sa 12s and have to do subs up and port well i guess port dont have to be back but.... Sorry for this q on ur thread bro

 

[wErd 5,000+ posts]

Should be a fun design/build. We have done one of those setups before we walled off the blazer. If done right, it should perform very very well.
I don't suggest subs up at all for this application though unless it simply has to be that way. During our testing with a similar setup we found that while it was .2db louder on the meter it did not perform on how we wanted it to.

What did you find the best sub/position for a blazer?

 

[Flastrongman 10+ year member]

sub up port back always worked best in my Jimmy, but sub up/ sub back and port to side worked good too. I also had good results with a 4th order/ port up.

 

[nate56 10+ year member]

Should be a fun design/build. We have done one of those setups before we walled off the blazer. If done right, it should perform very very well.
I don't suggest subs up at all for this application though unless it simply has to be that way. During our testing with a similar setup we found that while it was .2db louder on the meter it did not perform on how we wanted it to.

How did u want them to perform?

 

[Flastrongman 10+ year member]

this is just another good example of pro-rabbit coming into a thread and saying "that's not the way I would have done it" " I know way more than any of you but then I'm going to dip out without any sound reasoning for why your way is wrong"

 

[pro-rabbit 5,000+ posts]

I was posting in your thread actually. I also don't live on the forums all day/night. I have a wife and daughter that I love to spend time with.

I love you too though, so it is ok. Say what you will.

The setup goal at the time was to get down and low and just be more a demo only setup. While as I said it did meter better with subs up and port back and performed very well, it was not the ideal setup we needed/wanted. We actually did subs back and port to the passenger side and got the exact response curve we wanted.