Need box Design and Cutsheet for 15 inch Fi SSD

[darkhunter139 10+ year member]

Could someone make me a box design and cut sheet for an 15 inch Fi SSD? I dont have any money in paypal right now but when I do ill give you a few bucks.

I am no good at making these myself I have tried a few times already and I want the box to be perfect, here are the dimensions of my trunk:

Id like the box to be around 16 inches high then I got about 26 inches wide and about 30 depth to work with.

Click to read more...

 

[SPY 5,000+ posts]

PM me with your desired net vol and tuning and I can help you out.

 

[psych0ticnemes1 5,000+ posts]

Ditto. If you still need a design send me a PM.

 

[darkhunter139 10+ year member]

Ditto. If you still need a design send me a PM.

Spy is doing it for me. Thanks for the offer though //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[darkhunter139 10+ year member]

Should I pre drill the holes? I did last time but it was a pain in the ***

 

[geowick07 10+ year member]

Always pre-drill, unless using a stapler or nail gun. Especially with MDF; that $hit loves to split.

 

[hl26 10+ year member]

yes always predrill, without it you run the risk of splitting the mdf and reducing the strength and rigidity of you box in doing so.

 

[BuckyBoy 10+ year member]

Should I pre drill the holes? I did last time but it was a pain in the ***

Yea, it shouldn't be that much of a pain. You don't have to put a ton of screws, one every 6-12" or so. Stay away from the edges, or sometimes even if you predrill you will get a split.

 

[darkhunter139 10+ year member]

Yea, it shouldn't be that much of a pain. You don't have to put a ton of screws, one every 6-12" or so. Stay away from the edges, or sometimes even if you predrill you will get a split.

I think that was my problem last time, I used to many screws.

Any recommendation on what kind of screws I could get? I did not really like the ones I used last time.

 

[BuckyBoy 10+ year member]

Whatever screws you like.

When I used screws, I just used the 1 1/2" drywall screws from Walmart.