Need answers quick!!!!!!

[yroc434]

ok so here is my set up thats curenly installed....

HEAD UNIT: Pioneer DEH 4600bt

AMP: Hifonics BRX2000.1D (1400watts rms @ 2 ohms )

LPF 35-250hz

SUBSONIC FILTER 15-35hzz

FREQUENCY RESPONSE 10-250hz

SUBS: Alpine Type R's (SWR 12D2 ) DVC 2 ohm wired at @ 2 ohms

ENCLOSURE: PORTED

WIDTH 38''

HEIGHT 14''

NET AIR SPACE 1.48 CU FT

GROSS AIR SPACE 1.71 CU FT

PORT 12'' X 1 1/4'' X 19''

TUNING F3=29hz RIPPLE= 4.4db FB= 35hz

MY PROBLEM IS IT SOUNDS MUDDY ON VARIOUS SONGS! I PREVIOUSLY HAD TYPE S 12's RAN BY A HIFONICS ZEUS 2 CHANNEL AMP AND THAT HIT WAY HARDER AND SOUNDED WAY BETTER THAN MY CURRENT SET UP! ALSO I DONT KNOW WHERE TO SET MY SUBSONIC FILTER AS WELL!! ALSO I HAVE TO TURN MY DECK UP O OVER 35 FOR IT TO BE DECENTLY LOUD. NEW TO CAR AUDIO SO PLEASE HELP!!!

Click to read more...

 

[CheЯRyMan]

if your f3 is accurate at 29hz set your SSF to 29-30hz.

 

[I'mPoor:(]

ok so here is my set up thats curenly installed....
HEAD UNIT: Pioneer DEH 4600bt

AMP: Hifonics BRX2000.1D (1400watts rms @ 2 ohms )

LPF 35-250hz

SUBSONIC FILTER 15-35hzz

FREQUENCY RESPONSE 10-250hz

SUBS: Alpine Type R's (SWR 12D2 ) DVC 2 ohm wired at @ 2 ohms

ENCLOSURE: PORTED

WIDTH 38''

HEIGHT 14''

NET AIR SPACE 1.48 CU FT

GROSS AIR SPACE 1.71 CU FT

PORT 12'' X 1 1/4'' X 19''

TUNING F3=29hz RIPPLE= 4.4db FB= 35hz

MY PROBLEM IS IT SOUNDS MUDDY ON VARIOUS SONGS! I PREVIOUSLY HAD TYPE S 12's RAN BY A HIFONICS ZEUS 2 CHANNEL AMP AND THAT HIT WAY HARDER AND SOUNDED WAY BETTER THAN MY CURRENT SET UP! ALSO I DONT KNOW WHERE TO SET MY SUBSONIC FILTER AS WELL!! ALSO I HAVE TO TURN MY DECK UP O OVER 35 FOR IT TO BE DECENTLY LOUD. NEW TO CAR AUDIO SO PLEASE HELP!!!

How did you set the gain on the amp?

 

[gckless 5,000+ posts]

Why are you yelling and why do you need this so quick?

 

[supra1987]

What model zeus amp?if it was an older model it probaly put out more power than the one you got now.

 

[yroc434]

my amp doesnt have a gain knob it has a LPF, SSF, and bass boost.... lpf is set at about 10'oclock

 

---------- Post added at 06:55 PM ---------- Previous post was at 06:54 PM ----------

 

cant remember but it was a newer model

 

[Popwarhomie 5,000+ posts]

YES IT DOES.

Image Sheet

 

[yroc434]

my amp has no gain knob... i has LPF, SSF, and Bass Boost..... LPF is set at abou 10'oclock, SSF is at 12'oclock ( 15 far left and 35 far right) bass boost is all the way down

 

[big scott]

your gain on that amp is called level. set it with a ddm or better yet a o-scope.

 

[yroc434]

how can i tell if its accurate or not? sorry but im a newbie to car audio

 

[Popwarhomie 5,000+ posts]

No one is talking about a gain knob. How did you get the gain level.

 

[yroc434]

ok

 

---------- Post added at 07:07 PM ---------- Previous post was at 07:06 PM ----------

 

the guy who hooked it up for me used a mutli meter,

 

[yroc434]

the guy who installed everything used a multi meter and he said he set it at 63.5 whatever that means

 

[I'mPoor:(]

the guy who installed everything used a multi meter and he said he set it at 63.5 whatever that means

It should be set right under 50vac. 52.9vac is 1400rms at 2-ohms. You didn't mess with any of the knobs did you?

 

[Jeffdachef 5,000+ posts]

take pictures of your amp settings and tell us how your head unit is set up atm. Where is your sub firing?

You sure its wired properly?