Need advice on 1-Ohm stable amps

[05gliguy 10+ year member]

the bxi series is a lil overrated, so you'll probably see around 500 watts out of the bxi600d

 

[rich.sounds 10+ year member]

the bxi series is a lil overrated, so you'll probably see around 500 watts out of the bxi600d

is it fairly clean and efficient?

 

[Audio Master 10+ year member]

Guys,
I need some advice on budget 1-Ohm stable amps. Needs to be able to push a mono 1.5-Ohm load and do so at 500-600w. Would like small footprint designs that make power very efficiently (crappy factory alt).

Budget is sub $200.

thx for any advice u can give..

Rich

i HAVE A SECONDHAND sTEG (OF COURSE)

ITS OF A SOUND BOARD THAT WE NEVER USED CAUSE THE BATTERY KLEPT GOING FLAT **** caps lock its a 120.2

itll do 400wrms at 2ohmsmono and its 11volt stableized I kno the get used at .5ohms so 1.5 should be sweet for about 500-600ish easy 200plus shipping best i can do

 

[rich.sounds 10+ year member]

i HAVE A SECONDHAND sTEG (OF COURSE)ITS OF A SOUND BOARD THAT WE NEVER USED CAUSE THE BATTERY KLEPT GOING FLAT **** caps lock its a 120.2

itll do 400wrms at 2ohmsmono and its 11volt stableized I kno the get used at .5ohms so 1.5 should be sweet for about 500-600ish easy 200plus shipping best i can do

Gotta link for more info on Steg gear?

 

[dcole18 5,000+ posts]

^^^ thats sounds like a good deal... steg it teh niceness

 

[05gliguy 10+ year member]

is it fairly clean and efficient?

My xx-colossus is, but I don't know about the brutus

 

[Audio Master 10+ year member]

Gotta link for more info on Steg gear?

YIP THIS IS THE MAIN WEBSITE BUT YOU CAN GO TO OUR WEBSITE IT JUST DOEENT HAVE THE AUDIO UP YET BUT I CAN SEND PICS IF NEEDED

f**kin caps lock

http://english.gttrading.it/easysite/scheda3.asp?livello=3&Marchio=Steg&Gamma=QmosII&Modello=QM%20120.2x&pg=1

or you can look at the rest of them but they ar BNIB only a 120./2 and a 45.2 seconhand

http://english.gttrading.it/easysite/level_2_3.asp?livello=

&Marchio=Steg&Gamma=QmosII&pg=1

hit me up for pics at 3b-inc@iinet.net.au