need a new setup

nismboy6986
10+ year member

the **** technician
due to some problems that came up when i tried to convert a exsisting sealed enclosure in to a ported enclousure (mainly how the **** do i mount the aeroports)

i decided to do a new install.

It will go in a 7th gen celica (think rsx or hatchback integra) and i want the sq and output to be inline of what a 12 idmax in a 2.7 cube @32hz with a bx1000D but hopefully a lil louder and much better top. it will have to be a enclousure with some fiberglass work since i don't see any rectangular enclusre looking sick enough to flow with the rest of the car and it has to be relatively light .

I was thinking 2 aa assasin 12's sealed but wondering if that would be enough

my budget would be 350 bones before shipping so a sealed 12 mag is out since i know someone will suggest that

 
probally a xenon 1200.1 or a ed nine.1 or maybe the boltar XI if i can clean it up good since i'm going to sell my grand marquis and buy my boys accord for my daily driver. i've now considered the fi q 12 either sealed or ported or maybe the fi q 15 sealed. if its a worthwhile upgrade over my ava 15. any suggestions?

 
my thing is i'm tired of system that wanged down low but just sould like the average joe blow ish as far as the top end goes which what category all my single ported setups have had which make me want to try multiple sealed. i would try 3 assasin 12's but the 3.6 cube box will bring the same weight fears as the ported 3.5 cube box unless i could get ahold of some 5/8 birch plywood. i think i 'll whip together a quick 2.5 cube sealed box for the ava and give it another chance sealed since i noticed using 2 inch screw instead of 1 1/4 made the boards come together alot tighter. so my box could be why the ava sounded so lackluster sealed. it was about as loud and my 12 ported idmax that was in a trunk car and this is in hatchback coupe.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

nismboy6986

10+ year member
the **** technician
Thread starter
nismboy6986
Joined
Location
Belhaven NC
Start date
Participants
Who Replied
Replies
4
Views
459
Last reply date
Last reply from
nismboy6986
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top