I have a Soundstorm EV1500M, the question is that I found some Kicker CompVR12s that I can get for pretty cheap, would this amp power both of those just fine and would the subs have to be 2ohm or 4ohm if I want to run them parallel? I also have a Kicker KX250.2 amp that I want to run 6.5 speakers to, what kind of wattage am I looking for that would be best for the amp? Thanks.
-
1Participant count
-
Participant list
Activity
No one is currently typing a reply...
Similar threads
Sony 4000 is also a great budget buy!
- Started by Arizreynoldsxxxx
- Head Units
How I would approach it is install your new amplifier and start using it.
Install a voltage gauge and if you see your voltage lowering then add...
- Started by Ellessucs
- Wiring, Electrical & Installation
While most Asian and African markets will identify Honda's small hatchback as the Jazz model, most Western regions will know the same model as the...
- Started by mhdali1
- Wiring, Electrical & Installation
The Kappa's have a high sensitivity rating of 93 db so the X802-5 would be fine. A good high sensitivity 8" sub in a properly sized box would fit...
- Started by kanihoncho
- Amplifiers
Yup , the dsp should have input sections, it may have one for sub?
Hu to dsp. Dsp to amps, amps to speakers. Probably help you to draw this all...
- Started by supafly1
- General Car Audio
About this thread
New threads
-
Fuse Taps at 30amp with 16AWG....- Started by Paul Curtis
- Replies: 7
-
-
What type and placement of box for dual 8 or 10" shallow depth subs for 2011 Hyundai Veracruz?
- Started by kanihoncho
- Replies: 5
-
-
